Velocity Reviews - Computer Hardware Reviews

Velocity Reviews > General Computer Discussion > General Computer Support > PIX 506e installation

Reply
Thread Tools

PIX 506e installation

 
 
mbvales mbvales is offline
Junior Member
Join Date: Aug 2006
Posts: 4
 
      08-11-2006
Dear All,

Hope someone can help me about my configuration. im not familiar on cisco firewall and this is my 1st time to setup.

My current setup are as follows:

1) ISP 202.164.141.19 (DNS)
2) RCST Router 202.164.141.73
3) ISA2000 (with 3 NICs)
1.) 202.164.141.74 (Gateway: 202.164.141.73 & DNS: 202.164.141.19)
2.) 192.168.0.20 (DNS: 192.168.0.1)
3.) 10.10.1.100 (Reserve for WiFi interface)
4) Switch

Now, I want to install the PIX in between RCST and ISA and it looks like this:
1) ISP 202.164.141.19 (DNS)
2) RCST Router 202.164.141.73
3) PIX (2 NIC)
1.) 202.164.141.74 (Outside)
2.) 192.168.1.1 (Inside)
3) ISA2000 (with 3 NICs)
1.) 192.168.1.2 (Gateway: 192.168.1.1 & DNS: ? )
2.) 192.168.0.20 (DNS: 192.168.0.1)
3.) 10.10.1.100 (Reserve for WiFi interface)
4) Switch

I tried these settings but doesn't work..dont know if there is a need in PIX to do routing or put the ISP DNS or a rules to allow internet..totally no idea; I just did trial and error...

Is anybody out there can help me if the aboved configuration are correct and give some ideas for some steps and where I will put the gateway and DNS...Thanks in Advance

- Moore
 
Reply With Quote
 
 
 
 
ITHSC ITHSC is offline
Junior Member
Join Date: Aug 2006
Location: United Kingdom
Posts: 5
 
      08-15-2006
Hi, Can you post your PIX config? Miss out all of the sensitive bits!
 
Reply With Quote
 
 
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
pix 501 vs pix 506e? Mike Cisco 4 07-09-2007 05:35 PM
PIX 506E PDM 3.0(1) PIX 6.3(3) NAT/PAT (Part 4) Michiel Cisco 0 08-25-2006 01:17 AM
PIX 506E PDM 3.0(1) PIX 6.3(3) NAT/PAT (Part 3) Michiel Cisco 19 08-24-2006 08:55 PM
PIX 506E PDM 3.0(1) PIX 6.3(3) NAT/PAT (Part 2) Michiel Cisco 2 08-22-2006 08:46 PM
PIX 506E PDM 3.0(1) PIX 6.3(3) NAT/PAT Michiel Cisco 4 08-22-2006 12:26 PM



Advertisments