Velocity Reviews - Computer Hardware Reviews

Velocity Reviews > Newsgroups > Computing > Cisco > Protocol Translation

Reply
Thread Tools

Protocol Translation

 
 
Gerhard Lein
Guest
Posts: n/a
 
      11-19-2004
Hi,

on a 3600 router i try to connect over the serial1/0 line, which connected to a
x.25 switch, to an tcp-host on the ethernet.
config:
XOTRouter#sh run
Building configuration...

Current configuration : 3392 bytes
!
version 12.2
service timestamps debug datetime msec localtime show-timezone
service timestamps log datetime msec localtime show-timezone
service password-encryption
!
x25 routing
interface Ethernet0/0
ip address 172.28.50.200 255.255.255.0
no ip route-cache
no ip mroute-cache
half-duplex
no cdp enable
!
interface TokenRing0/0
no ip address
shutdown
ring-speed 16
no cdp enable
!
interface Serial1/0
description ibm-pos terminals (710021 17)
bandwidth 128
no ip address
encapsulation x25 dce
no ip mroute-cache
x25 address 73331010
x25 nvc 8
serial restart_delay 0
no cdp enable
translate x25 73331010 tcp 172.28.50.200 port 8888
translate x25 71008111 tcp 172.28.50.10 port 9999 stream

if i set a call from the x25 switch the debug message look like this
XOTRouter#
*Mar 1 01:47:11.998 MEZ: Serial1/0: X.25 I R1 Call (27) 8 lci 9
*Mar 1 01:47:11.998 MEZ: From (: 71008108 To (: 73331010
*Mar 1 01:47:12.002 MEZ: Facilities: (10)
*Mar 1 01:47:12.002 MEZ: Behavior flags:
*Mar 1 01:47:12.002 MEZ: no Reverse charging, no Fast select
*Mar 1 01:47:12.002 MEZ: Throughputs: 9600 9600
*Mar 1 01:47:12.002 MEZ: Packet sizes: 128 128
*Mar 1 01:47:12.002 MEZ: Window sizes: 3 3
*Mar 1 01:47:12.002 MEZ: Call User Data (4): 0x01000000 (pad)
*Mar 1 01:47:12.006 MEZ: Serial1/0: X.25 O R1 Clear (5) 8 lci 9
*Mar 1 01:47:12.006 MEZ: Cause 13, Diag 116 (Not obtainable/International lin
k busy)
*Mar 1 01:47:12.022 MEZ: Serial1/0: X.25 I R1 Clear Confirm (3) 8 lci 9
*Mar 1 01:47:19.850 MEZ: Serial1/0: X.25 I R1 Call (27) 8 lci 9
*Mar 1 01:47:19.854 MEZ: From (: 71008108 To (: 71008111
*Mar 1 01:47:19.854 MEZ: Facilities: (10)
*Mar 1 01:47:19.854 MEZ: Behavior flags:
*Mar 1 01:47:19.854 MEZ: no Reverse charging, no Fast select
*Mar 1 01:47:19.854 MEZ: Throughputs: 9600 9600
*Mar 1 01:47:19.854 MEZ: Packet sizes: 128 128
*Mar 1 01:47:19.854 MEZ: Window sizes: 3 3
*Mar 1 01:47:19.854 MEZ: Call User Data (4): 0x01000000 (pad)
*Mar 1 01:47:19.858 MEZ: Serial1/0: X.25 O R1 Clear (5) 8 lci 9
*Mar 1 01:47:19.858 MEZ: Cause 13, Diag 116 (Not obtainable/International lin
k busy)
*Mar 1 01:47:19.866 MEZ: Serial1/0: X.25 I R1 Clear Confirm (3) 8 lci 9


any idea what ist wrong ??

regars
gerhard
 
Reply With Quote
 
 
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
PIX PPTP VPN Passthrough: regular translation creation failed for protocol 47 armyadam@gmail.com Cisco 2 04-17-2012 08:03 PM
%ASA-3-305006: regular translation creation failed for protocol 50 dt1649651@yahoo.com Cisco 16 05-05-2009 04:47 PM
regular translation creation failed for protocol 50 src inside:172.16.0.105 M Cisco 3 03-05-2009 04:50 PM
Cisco protocol translation: tcp <--> x.25 deen0 Cisco 0 02-14-2008 01:56 PM
X.25 to TCP protocol translation Sascha E. Pollok Cisco 4 12-02-2003 04:23 PM



Advertisments