Velocity Reviews - Computer Hardware Reviews

Velocity Reviews > Newsgroups > Computing > Cisco > NAT two outside TCP ports to one inside TCP port

Reply
Thread Tools

NAT two outside TCP ports to one inside TCP port

 
 
Kevin
Guest
Posts: n/a
 
      11-10-2004
Hi,

Do you know how to set up NAT so that two differents TCP port on the outside
interface redirects to the same inside IP/TCP port ?

For example:

ip nat inside source static tcp 192.168.1.1 80 interface Ethernet0 80
and
ip nat inside source static tcp 192.168.1.1 80 interface Ethernet0 8080

Can not cohexist together, setting one will automaticly disable the other
....

Thanks !


 
Reply With Quote
 
 
 
 
Walter Roberson
Guest
Posts: n/a
 
      11-10-2004
In article <4191b478$0$3006$(E-Mail Removed)>,
Kevin <(E-Mail Removed)> wrote:
o you know how to set up NAT so that two differents TCP port on the outside
:interface redirects to the same inside IP/TCP port ?

:For example:

:ip nat inside source static tcp 192.168.1.1 80 interface Ethernet0 80
:and
:ip nat inside source static tcp 192.168.1.1 80 interface Ethernet0 8080

:Can not cohexist together, setting one will automaticly disable the other

I seriously doubt you can do that. What happens if a packet originates
at inside port 80 -- which port should it get mapped to as it goes out?
--
100% of all human deaths occur within 100 miles of Earth.
 
Reply With Quote
 
 
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
PIX 501 Multiple Outside Ports to Single Inside Port Paul Smedshammer Cisco 6 05-09-2008 11:25 AM
Pix 506e w/5 static outside IPs - How to create a rule to allow ALL tcp/udp traffic from one outside IP to an internal IP (for an internal router/NAT with it's own subnet) kyoo Cisco 22 04-12-2008 03:37 PM
help with pix inside->outside + dmz->outside + inside->outside->dmz Jack Cisco 0 09-19-2007 01:57 AM
CallForward outside->inside->outside failed after one ring. Yogz Cisco 1 04-16-2007 03:58 PM
NAT port mapping between one inside server and two outside dhcp interfaces Kevin Cisco 4 11-28-2003 02:38 AM



Advertisments