Velocity Reviews - Computer Hardware Reviews

Velocity Reviews > Newsgroups > Computing > Cisco > Lose internet access when vpn enabled cisco 501

Reply
Thread Tools

Lose internet access when vpn enabled cisco 501

 
 
cdoc
Guest
Posts: n/a
 
      08-03-2006
Brian
The internal is 192.168.5.0 and the remote outside is 64.*.*.* and the
remote internal is 192.168.100.0

Can I assume that the syntax is

access-list inside_outbound_nat0_acl permit ip 192.168.5.0 255.255.255.0
192.168.100.0 255.255.255.0
access-list outside_cryptomap_20 permit ip 192.168.5.0 255.255.255.0
192.168.100.0 255.255.255.0

I really appreciate this help BTW


Brian V wrote:
> "cdoc" <(E-Mail Removed)> wrote in message
> news:HmcAg.19106$(E-Mail Removed).. .
>> Should it be
>>
>> access-list inside_outbound_nat0_acl permit ip 192.168.1.0 255.255.255.0
>> 192.168.5.0 255.255.255.0
>> access-list outside_cryptomap_20 permit ip 192.168.1.0 255.255.255.0
>> 192.168.5.0 255.255.255.0
>>
>>
>>
>>
>> cdoc wrote:
>>> PS
>>> I indeed only have one vpn connection.
>>>
>>> cdoc wrote:
>>>> Thanks Brian
>>>> If my lan subnet on this side is 192.168.5.0 and the remote lan is
>>>> 192.168.100.0 what should the syntax on these two entries be?
>>>> Thanks again for your help.
>>>>

> <snip>
>
> If internal is 192.168.5.X and the remote is 192.168.1.X use:
> access-list inside_outbound_nat0_acl permit ip 192.168.5.0 255.255.255.0
> 192.168.1.0 255.255.255.0
> access-list outside_cryptomap_20 permit ip 192.168.5.0 255.255.255.0
> 192.168.1.0 255.255.255.0
>
> If internal is 192.168.5.X and the remote is 192.168.100.X use:
> access-list inside_outbound_nat0_acl permit ip 192.168.5.0 255.255.255.0
> 192.168.100.0 255.255.255.0
> access-list outside_cryptomap_20 permit ip 192.168.5.0 255.255.255.0
> 192.168.100.0 255.255.255.0
>
>
>
>

 
Reply With Quote
 
 
 
 
Brian V
Guest
Posts: n/a
 
      08-03-2006
Yes, that is correct.

> Brian
> The internal is 192.168.5.0 and the remote outside is 64.*.*.* and the
> remote internal is 192.168.100.0
>
> Can I assume that the syntax is
>
> access-list inside_outbound_nat0_acl permit ip 192.168.5.0 255.255.255.0
> 192.168.100.0 255.255.255.0
> access-list outside_cryptomap_20 permit ip 192.168.5.0 255.255.255.0
> 192.168.100.0 255.255.255.0
>
> I really appreciate this help BTW
>
>
> Brian V wrote:
>> "cdoc" <(E-Mail Removed)> wrote in message
>> news:HmcAg.19106$(E-Mail Removed).. .
>>> Should it be
>>>
>>> access-list inside_outbound_nat0_acl permit ip 192.168.1.0 255.255.255.0
>>> 192.168.5.0 255.255.255.0
>>> access-list outside_cryptomap_20 permit ip 192.168.1.0 255.255.255.0
>>> 192.168.5.0 255.255.255.0
>>>
>>>
>>>
>>>
>>> cdoc wrote:
>>>> PS
>>>> I indeed only have one vpn connection.
>>>>
>>>> cdoc wrote:
>>>>> Thanks Brian
>>>>> If my lan subnet on this side is 192.168.5.0 and the remote lan is
>>>>> 192.168.100.0 what should the syntax on these two entries be?
>>>>> Thanks again for your help.
>>>>>

>> <snip>
>>
>> If internal is 192.168.5.X and the remote is 192.168.1.X use:
>> access-list inside_outbound_nat0_acl permit ip 192.168.5.0 255.255.255.0
>> 192.168.1.0 255.255.255.0
>> access-list outside_cryptomap_20 permit ip 192.168.5.0 255.255.255.0
>> 192.168.1.0 255.255.255.0
>>
>> If internal is 192.168.5.X and the remote is 192.168.100.X use:
>> access-list inside_outbound_nat0_acl permit ip 192.168.5.0 255.255.255.0
>> 192.168.100.0 255.255.255.0
>> access-list outside_cryptomap_20 permit ip 192.168.5.0 255.255.255.0
>> 192.168.100.0 255.255.255.0
>>
>>




 
Reply With Quote
 
 
 
 
cdoc
Guest
Posts: n/a
 
      08-05-2006
Thanks Brian, that did it.
I appreciate you taking your time to help me.


Brian V wrote:
> Yes, that is correct.
>
>> Brian
>> The internal is 192.168.5.0 and the remote outside is 64.*.*.* and the
>> remote internal is 192.168.100.0
>>
>> Can I assume that the syntax is
>>
>> access-list inside_outbound_nat0_acl permit ip 192.168.5.0 255.255.255.0
>> 192.168.100.0 255.255.255.0
>> access-list outside_cryptomap_20 permit ip 192.168.5.0 255.255.255.0
>> 192.168.100.0 255.255.255.0
>>
>> I really appreciate this help BTW
>>
>>
>> Brian V wrote:
>>> "cdoc" <(E-Mail Removed)> wrote in message
>>> news:HmcAg.19106$(E-Mail Removed).. .
>>>> Should it be
>>>>
>>>> access-list inside_outbound_nat0_acl permit ip 192.168.1.0 255.255.255.0
>>>> 192.168.5.0 255.255.255.0
>>>> access-list outside_cryptomap_20 permit ip 192.168.1.0 255.255.255.0
>>>> 192.168.5.0 255.255.255.0
>>>>
>>>>
>>>>
>>>>
>>>> cdoc wrote:
>>>>> PS
>>>>> I indeed only have one vpn connection.
>>>>>
>>>>> cdoc wrote:
>>>>>> Thanks Brian
>>>>>> If my lan subnet on this side is 192.168.5.0 and the remote lan is
>>>>>> 192.168.100.0 what should the syntax on these two entries be?
>>>>>> Thanks again for your help.
>>>>>>
>>> <snip>
>>>
>>> If internal is 192.168.5.X and the remote is 192.168.1.X use:
>>> access-list inside_outbound_nat0_acl permit ip 192.168.5.0 255.255.255.0
>>> 192.168.1.0 255.255.255.0
>>> access-list outside_cryptomap_20 permit ip 192.168.5.0 255.255.255.0
>>> 192.168.1.0 255.255.255.0
>>>
>>> If internal is 192.168.5.X and the remote is 192.168.100.X use:
>>> access-list inside_outbound_nat0_acl permit ip 192.168.5.0 255.255.255.0
>>> 192.168.100.0 255.255.255.0
>>> access-list outside_cryptomap_20 permit ip 192.168.5.0 255.255.255.0
>>> 192.168.100.0 255.255.255.0
>>>
>>>

>
>
>

 
Reply With Quote
 
Brian V
Guest
Posts: n/a
 
      08-05-2006
Very welcome.


"cdoc" <(E-Mail Removed)> wrote in message
news:H%4Bg.16968$(E-Mail Removed)...
> Thanks Brian, that did it.
> I appreciate you taking your time to help me.
>
>
> Brian V wrote:
>> Yes, that is correct.
>>
>>> Brian
>>> The internal is 192.168.5.0 and the remote outside is 64.*.*.* and the
>>> remote internal is 192.168.100.0
>>>
>>> Can I assume that the syntax is
>>>
>>> access-list inside_outbound_nat0_acl permit ip 192.168.5.0 255.255.255.0
>>> 192.168.100.0 255.255.255.0
>>> access-list outside_cryptomap_20 permit ip 192.168.5.0 255.255.255.0
>>> 192.168.100.0 255.255.255.0
>>>
>>> I really appreciate this help BTW
>>>
>>>
>>> Brian V wrote:
>>>> "cdoc" <(E-Mail Removed)> wrote in message
>>>> news:HmcAg.19106$(E-Mail Removed).. .
>>>>> Should it be
>>>>>
>>>>> access-list inside_outbound_nat0_acl permit ip 192.168.1.0
>>>>> 255.255.255.0 192.168.5.0 255.255.255.0
>>>>> access-list outside_cryptomap_20 permit ip 192.168.1.0 255.255.255.0
>>>>> 192.168.5.0 255.255.255.0
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> cdoc wrote:
>>>>>> PS
>>>>>> I indeed only have one vpn connection.
>>>>>>
>>>>>> cdoc wrote:
>>>>>>> Thanks Brian
>>>>>>> If my lan subnet on this side is 192.168.5.0 and the remote lan is
>>>>>>> 192.168.100.0 what should the syntax on these two entries be?
>>>>>>> Thanks again for your help.
>>>>>>>
>>>> <snip>
>>>>
>>>> If internal is 192.168.5.X and the remote is 192.168.1.X use:
>>>> access-list inside_outbound_nat0_acl permit ip 192.168.5.0
>>>> 255.255.255.0 192.168.1.0 255.255.255.0
>>>> access-list outside_cryptomap_20 permit ip 192.168.5.0 255.255.255.0
>>>> 192.168.1.0 255.255.255.0
>>>>
>>>> If internal is 192.168.5.X and the remote is 192.168.100.X use:
>>>> access-list inside_outbound_nat0_acl permit ip 192.168.5.0
>>>> 255.255.255.0 192.168.100.0 255.255.255.0
>>>> access-list outside_cryptomap_20 permit ip 192.168.5.0 255.255.255.0
>>>> 192.168.100.0 255.255.255.0
>>>>
>>>>

>>
>>


 
Reply With Quote
 
 
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
You lose some, and then you lose some ... Lawrence D'Oliveiro NZ Computing 13 09-24-2006 08:29 AM
Cisco vpn server enabled / VPN and no-VPN connections mix Elise Cisco 6 05-22-2004 07:55 AM
PIX 501: Access an IPSEC VPN through a PPTP VPN - is this possible? Alex Cisco 3 05-11-2004 11:26 PM
VPN terminates on pix 501...but i cannot access windows 2000 vpn server Warren Turner Cisco 0 01-09-2004 08:28 PM
Cant establish a VPN tunnel between PIX 501 and Cisco VPN Client Martin Nowles Cisco 0 11-10-2003 03:46 PM



Advertisments