Cisco - 1721 loses config after power cycle ? help please

10-12-2004, 06:52 PM

Hi all,
when I power cycle my 1721 loses her configuration. The strange thing is
that
(after cycling) I do sh conf , and there is my conf. But I will not start up
with
it. What is my problem ? of course i did copy running-config startup-c etc.
Danke !

Kalina

10-12-2004, 07:01 PM

Kalina <> wrote:

Kalina,

check your configuration register (sh ver). It should be set
to 0x2102. If you got it set to 0x2142, it skips
loading the configuration for password recovery purposes.
Do a conf t, config-register 0x2102.

Cheers
Sascha

> Hi all,
> when I power cycle my 1721 loses her configuration. The strange thing is
> that
> (after cycling) I do sh conf , and there is my conf. But I will not start up
> with
> it. What is my problem ? of course i did copy running-config startup-c etc.
> Danke !
>
>

Sascha E. Pollok

10-12-2004, 07:13 PM

Danke, this was the problem !

"Sascha E. Pollok" <> schreef in bericht
news:ckh66d$2s7$...
> Kalina <> wrote:
>
> Kalina,
>
> check your configuration register (sh ver). It should be set
> to 0x2102. If you got it set to 0x2142, it skips
> loading the configuration for password recovery purposes.
> Do a conf t, config-register 0x2102.
>
> Cheers
> Sascha
>
>
> > Hi all,
> > when I power cycle my 1721 loses her configuration. The strange thing is
> > that
> > (after cycling) I do sh conf , and there is my conf. But I will not
start up
> > with
> > it. What is my problem ? of course i did copy running-config startup-c
etc.
> > Danke !
> >
> >

Kalina

10-12-2004, 07:01 PM	#2
Sascha E. Pollok Posts: n/a	Re: 1721 loses config after power cycle ? help please Kalina <> wrote: Kalina, check your configuration register (sh ver). It should be set to 0x2102. If you got it set to 0x2142, it skips loading the configuration for password recovery purposes. Do a conf t, config-register 0x2102. Cheers Sascha > Hi all, > when I power cycle my 1721 loses her configuration. The strange thing is > that > (after cycling) I do sh conf , and there is my conf. But I will not start up > with > it. What is my problem ? of course i did copy running-config startup-c etc. > Danke ! > > Sascha E. Pollok

10-12-2004, 07:13 PM	#3
Kalina Posts: n/a	Re: 1721 loses config after power cycle ? help please Danke, this was the problem ! "Sascha E. Pollok" <> schreef in bericht news:ckh66d$2s7$... > Kalina <> wrote: > > Kalina, > > check your configuration register (sh ver). It should be set > to 0x2102. If you got it set to 0x2142, it skips > loading the configuration for password recovery purposes. > Do a conf t, config-register 0x2102. > > Cheers > Sascha > > > > Hi all, > > when I power cycle my 1721 loses her configuration. The strange thing is > > that > > (after cycling) I do sh conf , and there is my conf. But I will not start up > > with > > it. What is my problem ? of course i did copy running-config startup-c etc. > > Danke ! > > > > Kalina

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
reporting power with dc_shell	perseo	Hardware	0	10-11-2007 09:01 AM
Power Supply vs. Motherboard	smackedass	A+ Certification	48	03-01-2007 07:35 AM
Judge: File-swapping tools are legal	Citizen Bob	DVD Video	140	11-08-2006 06:42 PM
Old PC Occasionally Won't Start, Doesn't Power Down all the time	mr x	A+ Certification	4	02-26-2004 04:50 AM
Power Supply Requirements	Joe	A+ Certification	1	12-20-2003 06:13 PM

10-12-2004, 06:52 PM	#1
	1721 loses config after power cycle ? help please Hi all, when I power cycle my 1721 loses her configuration. The strange thing is that (after cycling) I do sh conf , and there is my conf. But I will not start up with it. What is my problem ? of course i did copy running-config startup-c etc. Danke ! Kalina