Velocity Reviews - Computer Hardware Reviews

Velocity Reviews > Newsgroups > Computing > Cisco > Problem with Catalyst 2970

Reply
Thread Tools

Problem with Catalyst 2970

 
 
Huseyin SELAN
Guest
Posts: n/a
 
      10-07-2004
Hi all,

We have a problem related to Catalyst 2970 (I think).

We have several AIX servers, 2 x Catalyst 2970 switches, and the LAN.
AIX servers have 10/100/1000 UTP connections to switches. Before we
have 2970 switches, we had Cisco 10/100 switches and everything was
fine.

Now, we have 2970 switches and nothing works. After users have
connected, a few minutes later their connections are dropped
especially WAN users. There is no problem with the local users. We
have inspected the connections and statistics of the all switches and
servers, but we could not see any errors, dropped packets etc.

By the way, we did not make any configuration on the switches, we have
just bought the switches and put them in to the network as boxes. In
fact, that's what we want. I mean, we have no need VLAN etc., we only
need faster connection than 10/100 switches.

Any idea ?

Thanks in advance,

H.SELAN
 
Reply With Quote
 
 
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
catalyst 2970 pierre Cisco 2 04-11-2007 04:51 PM
Cisco 2970 strange traffic problem - stumped cisco support Joe Cisco 3 02-10-2005 10:34 PM
Interconnection between CAT4003 and 2970 Hoosier Daddy Cisco 1 05-10-2004 06:10 PM
Need Help setting up Etherchannel w/ EMC Celerra (Cisco 2970) Todd Richert Cisco 3 02-09-2004 10:22 AM
Cisco 2970 Switch, Etherchannel Problem, Layer2 Down Todd Richert Cisco 3 01-10-2004 05:27 AM



Advertisments