We have several CDN devices: CE507s and CE560. Each have software issues
that do not allow the system to boot, as such we can not repair or
upgrade the devices. The CE560 gives an "Invalid Partion" error and the
507 says "No boot sector found". Our problem is documentaion on how to
re-install the software can not be found in either the manuals,
documentation on the CDs, or the website.
The CE-507 will boot into flash, but the CE-560 will not, even though we
set it to boot to flash, diag, and none it is still booting only to the
hard drive. What can we do to re-install the OS?
CE-560 BOOT
Initializing memory. Please wait.
BIOS Version: Cisco 03.0C
BIOS Build date: 06/22/01
Symbios, Inc. SDMS (TM) V4.0 PCI SCSI BIOS, PCI Rev. 2.0, 2.1
Copyright 1995, 1998 Symbios, Inc.
PCI-4.11.00
HBA ID LUN VENDOR PRODUCT REV SYNC WIDE INT13 CYL/ HD/SEC
--- -- --- -------- ---------------- ---- ---- ---- ----- ------------
0 0 0 IBM DDYS-T36950M S96H 80.0 16 BOOT 1024/255/63
0 1 0 IBM DDYS-T36950M S96H 80.0 16 81h 1024/255/63
0 7 0 Symbios SYM53C895 0002 80.0 16
Symbios, Inc. PCI boot ROM successfully installed!
System Now Booting ...Invalid partition table
CE-507 BOOT
Symbios, Inc. PCI boot ROM successfully installed!
System Now Booting ...Invalid partition table
BIOS Version: CE500 01.11
BIOS Build date: 07/27/00
Symbios, Inc. SDMS (TM) V4.0 PCI SCSI BIOS, PCI Rev. 2.0, 2.1
Copyright 1995, 1998 Symbios, Inc.
PCI-4.11.00
HBA ID LUN VENDOR PRODUCT REV SYNC WIDE INT13 CYL/ HD/SEC
--- -- --- -------- ---------------- ---- ---- ---- ----- ------------
0 0 0 IBM DDYS-T18350M S96H 80.0 16 BOOT 1024/ 64/32
0 7 0 Symbios SYM53C895 0002 80.0 16
Symbios, Inc. PCI boot ROM successfully installed!
Cisco CE Booting From Flash.
No boot sector found. Reboot your computer.
|