«

Got 2610XM with NM-HD-2V and VIC2-2BRI. Loaded IP-PLus and IP-Voice 12.3.10
but
get following error message:

---
*Mar 1 00:00:10.440: %PA-3-NOTSUPPORTED: PA in slot1 (Unknown (type 923))
is not supported on this image.
Please issue "show diag" in fully loaded IOS image
to get the PA's information and verify if it is supported
by this image, a newer version may be needed.
---

Following IOS images where loaded to test:
c2600-is-mz.123-10.bin
c2600-ipvoice-mz.123-10.bin

---
SIP01#sh diag
Slot 0:
C2610XM 1FE Mainboard Port adapter, 3 ports
Port adapter is analyzed
Port adapter insertion time unknown
EEPROM contents at hardware discovery:
Hardware Revision : 1.0
PCB Serial Number : xxxx
Part Number : 73-7677-02
RMA History : 00
RMA Number : 0-0-0-0
Board Revision : A0
Deviation Number : 0-0
EEPROM format version 4
EEPROM contents (hex):
0x00: 04 FF 40 03 6A 41 01 00 C1 18 4A 41 44 30 37 30
0x10: 32 30 42 31 59 20 28 33 38 39 35 32 37 39 32 37
0x20: 32 29 82 49 1D FD 02 04 00 81 00 00 00 00 42 41
0x30: 30 80 00 00 00 00 FF FF FF FF FF FF FF FF FF FF
0x40: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x50: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

WIC Slot 1:
Two Port Modem WIC
Hardware revision 1.0 Board revision C0
Serial number xxxx Part number 800-08283-01
Test history 0x0 RMA number 00-00-00
Connector type Wan Module
EEPROM format version 1
EEPROM contents (hex):
0x20: 01 37 01 00 01 C1 13 52 50 20 5B 01 00 00 00 00
0x30: 60 00 00 00 02 12 14 01 FF FF FF FF FF FF FF FF

Slot 1:
Unknown (type 923) Port adapter
Port adapter is disabled
Port adapter insertion time unknown
EEPROM contents at hardware discovery:
Hardware Revision : 5.1
Top Assy. Part Number : 800-21591-01
Board Revision : B0
Deviation Number : 0-0
Fab Version : 03
PCB Serial Number : xxxxxx
RMA Test History : 00
RMA Number : 0-0-0-0
RMA History : 00
Version Identifier (VID) : V
EEPROM format version 4
EEPROM contents (hex):
0x00: 04 FF 40 03 9B 41 05 01 C0 46 03 20 00 54 57 01
0x10: 42 42 30 80 00 00 00 00 02 03 C1 8B 46 4F 43 30
0x20: 38 32 39 30 38 56 41 03 00 81 00 00 00 00 04 00
0x30: 89 56 00 00 00 FF FF FF FF FF FF FF FF FF FF FF
0x40: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x50: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
---

Jan wrote:
> Got 2610XM with NM-HD-2V and VIC2-2BRI. Loaded IP-PLus and IP-Voice
> 12.3.10 but get following error message:
> *Mar 1 00:00:10.440: %PA-3-NOTSUPPORTED: PA in slot1 (Unknown (type 923))
> Following IOS images where loaded to test:
> c2600-is-mz.123-10.bin
> c2600-ipvoice-mz.123-10.bin

You will need 12.3T train image to support VIC2-2BRI card.

--
this space was intentionally left blank | £ukasz Bromirski
you can insert your favourite quote here | lukasz:bromirski,net

[sasami009]

/sasami009/blog/item/6d12130780e3e57c020881fe.html 磁力泵的结构特点/sasami009/blog/item/dd19ef449df83b38879473f7.html 各种真空泵的工作原理/sasami009/blog/item/f013cedfb8ef3e5fccbf1af4.html 如何正确使用标准化工泵/sasami009/blog/item/b35fab8998546893a4c272ea.html 齿轮油泵故障分析及排除方法/sasami009/blog/item/f478f834e0b7081690ef39e9.html 五大离心泵保管对策/sasami009/blog/item/f478f834e0b7081690ef39e9.html /sasami009/blog/item/92c4e183f43023b86c8119ef.html 管道泵的使用要点 /sasami009/blog/item/a61bdc8a1ff5ce789e2fb423.html 水泵检验标准 引言 </p>
<p> sasami009.blog.163.com/blog/static/1097551702009226105455417/ 阀门的作用是什么？对阀门有哪些要求？
sasami009.blog.163.com/blog/static/1097551702009226105417609/ 排气阀概述
sasami009.blog.163.com/blog/static/109755170200912041730818/ 离心泵的安装技术
sasami009.blog.163.com/blog/static/10975517020091204111215/ 自吸泵小知识
sasami009.blog.163.com/blog/static/1097551702009120412749/ 磁力泵的使用与维修
sasami009.blog.163.com/blog/static/109755170200912034711548/ 气动隔膜泵的原理和使用领域