Velocity Reviews - Computer Hardware Reviews

Velocity Reviews > Newsgroups > Computing > Cisco > How to calculate the flux of SPAN Port?

Reply
Thread Tools

How to calculate the flux of SPAN Port?

 
 
Prfone Wang
Guest
Posts: n/a
 
      09-24-2004
I set a span port on Cisco Catalyst 2948G ,just useing the following
command:
Console> (enable) set span 2/1-3 2/4 both inpkts enable
SPAN destination port incoming packets enabled.
Enabled monitoring of Port 2/1-3 transmit/receive traffic by Port 2/4

but,when I check the flux of 2/1-4 ports, I find the flux of port 2/4
is not sum of the flux of 2/1-3. Then Can anyone explain the reasons
to me ?thanx .

Console> (enable) show span
Status : enabled
Admin Source : Port 2/1-3
Oper Source : Port 2/1-3
Destination : Port 2/4
Direction : transmit/receive
Incoming Packets: enabled

Console> (enable) show port mac

Port Rcv-Unicast Rcv-Multicast Rcv-Broadcast
-------- -------------------- --------------------
--------------------
2/1 78813 0
1
2/2 10123 0
0
2/3 0 0
0
2/4 542 0
0
Port Xmit-Unicast Xmit-Multicast Xmit-Broadcast
-------- -------------------- --------------------
--------------------
2/1 75456 6643
815
2/2 9930 6644
816
2/3 0 0
0
2/4 174857 190
816
Port Rcv-Octet Xmit-Octet
-------- -------------------- --------------------
2/1 8172432 35120399
2/2 1117579 4393583
2/3 0 0
2/4 67902 47934366
 
Reply With Quote
 
 
 
 
AnyBody43
Guest
Posts: n/a
 
      09-24-2004
http://www.velocityreviews.com/forums/(E-Mail Removed) (Prfone Wang) wrote in message news:<(E-Mail Removed) om>...
> I set a span port on Cisco Catalyst 2948G ,just useing the following
> command:
> Console> (enable) set span 2/1-3 2/4 both inpkts enable
> SPAN destination port incoming packets enabled.
> Enabled monitoring of Port 2/1-3 transmit/receive traffic by Port 2/4
>
> but,when I check the flux of 2/1-4 ports, I find the flux of port 2/4
> is not sum of the flux of 2/1-3. Then Can anyone explain the reasons
> to me ?thanx .
>
> Console> (enable) show span
> Incoming Packets: enabled

^^^^^^^

The destination port also keeps working (at least in some some of
the time catalysts) for normal traffic on its own VLAN.
There is alo CDP, BPDU ......

Port Rcv-Unicast Rcv-Multicast Rcv-Broadcast
-------- -------------------- -------------------- --------------------
2/1 78813 0 1
2/2 10123 0 0
2/3 0 0 0
Total 1-3 10124


2/4 542 0 0


Port Xmit-Unicast Xmit-Multicast Xmit-Broadcast
-------- -------------------- -------------------- --------------------
2/1 75456 6643 815
2/2 9930 6644 816
2/3 0 0 0
85386 13287 1631

(Sum of 1-3 Tx+Rx) >> 95510 13287 1631 <<-#########
2/4 >> 174857 190 816 <<-#########

Port Rcv-Octet Xmit-Octet
-------- -------------------- --------------------
2/1 8172432 35120399
2/2 1117579 4393583
2/3 0 0
9290011 39513982

(Sum of 1-3 Tx+Rx) >> 48803993 <<-#########
2/4 67902 >> 47934366 <<-#########

Maybe CDP and BPDU are not SPANned.
 
Reply With Quote
 
 
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
DVD Verdict reviews: AEON FLUX, KARAS: THE PROPHECY, and more! DVD Verdict DVD Video 0 04-25-2006 08:21 AM
DVD Verdict reviews: AEON FLUX: THE COMPLETE ANIMATED COLLECTION and more! DVD Verdict DVD Video 0 12-07-2005 09:13 AM
"AEON FLUX" Animated Bonus Disc Question Jason DVD Video 5 11-24-2005 03:52 PM
AEON FLUX DVD eta 11/22 Goro DVD Video 2 08-31-2005 10:36 PM
How to calculate the flux of SPAN Port? Prfone Wang Cisco 0 09-27-2004 12:38 AM



Advertisments