«

X-No-Archive: yes

Dear All,

just need a quick bit of advice in understanding my frame-relay setup.

First please take a look at:

http://www.infoplus.plus.com/

to see a diagram of a point-to-point lab i've setup.

everything works fine, it's just that I don't understand whats going on at
my frame relay switch.

when I run a:

X-No-Archive: yes

Dear All,

just need a quick bit of advice in understanding my frame-relay setup.

First please take a look at:

http://www.infoplus.plus.com/

to see a diagram of a point-to-point lab i've setup.

everything works fine, it's just that I need some clarification.

when I run a:

frame-relayDCE#show frame-relay route

at the FR switch I get:

Input Intf Input Dlci Output Intf Output Dlci Status
Serial0/0 100 Serial0/1 101 active
Serial0/1 101 Serial0/0 100 active

as illustrated in my diagram.

Can someone please explain how on router TOP - I am mapping ip 192.168.13.2
to DLCI 100, shouldn't that be 101 or am I supposed to be mapping it to it's
own DLCI?

thanks. Apologies if this is trivial, it's 2.20am here, and my brain has
gone into standby!