«

Hi,

I have a 6160 DSLAM concentrator to provide ADSL connections,that is
connected to a 7204 across ATM to pass the atm/adsl users to the local lan.

The problem is that every time that I restart the 6160, the ATM that
connect with the 7204 is autoconfigured in "framing m23plcp", and I
need to entry in the router and reconfigure it to "no framing m23plcp".

I do a "write mem" with the correct configuration, but when I restart,
the framing m23plcp appear another time.

Is this a software bug, or I'm doing something wrong? The version is
12.1(1)DA, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)


Anybody can help me?


Thanks in advance,


David Corredor
--

its a bug

CSCds21826 Bug Details


Headline Framing mode changes from cbitadm to m23 following reboot or
upgrade
Product c6160 Model
Component ni2 Duplicate of
Severity 2 Severity help Status Verified Status help
First Found-in Version 12.1(2)DA All affected versions First
Fixed-in Version Version help
Release Notes

Symptom:
Configuring a DS3 interface with framing cbitadm followed by a write
will cause the interface to have framing m23plcp after a reload.
Workaround:
Reconfigure the interface with framing cbitadm after every reload.