In article < >,
says...
> Hi list,
>
> I have to get the active PPP Users, who are dialed in a Cisco AS5350.
> I tried it with SNMP and it works, but the result is wrong very often.
> If I compare the SNMP output with the output of the console (with
> show caller ip), it seems that on the console you get the right
> result. With SNMP you get empty user names, double user names or user
> names which are not correct. I think, this is not an SNMP client
> issue, because the results are wrong with a variety of SNMP clients
> (snmpwalk, braa...). I noticed this bug in IOS 12.3.3e. Today I made
> an experiment with 12.3.10 and the result was even worse (much more
> empty user names)! Anybody out there, who has got a work around or an
> IOS version, which gives the right results?
>
> SNMP queries I have made with snmpwalk (all with wrong results):
> cctActiveUserId (1.3.6.1.4.1.9.9.163.1.2.3.1.9) of
> CISCO-CALL-TRACKER-MIB
> casnActiveEntry (1.3.6.1.4.1.9.9.150.1.1.3.1.2) of
> CISCO-AAA-SESSION-MIB
> cpmActiveUserId (1.3.6.1.4.1.9.10.19.1.3.1.1.3) of CISCO-POP-MGMT-MIB
> IOS Versions:
> 12.3.3e (IP PLUS)
> 12.3.10 (IP PLUS)
>
> Thank you very much
>
> Regards
> Kurt Tragant
>
Open a TAC case and request fixup. There's probably an interim image
that fixes that problem..
--
-Ivan.
*** Use Rot13 to see my eMail address ***
Similar Threads
