«

Gang

I have a couple of 2501 routers each with a bri interface. Is it possible
for simulate isdn bri conection, ddr routing and such?


Thanks

John

In article <06TUc.114117$sh.37739@fed1read06>, says...
>
>
> Gang
>
> I have a couple of 2501 routers each with a bri interface. Is it possible
> for simulate isdn bri conection, ddr routing and such?

Not w/o a ISDN simulator. But you can do AUX to AUX. CCO has some
examples on how to do this.


--

hsb

"Somehow I imagined this experience would be more rewarding" Calvin
*************** USE ROT13 TO SEE MY EMAIL ADDRESS ****************
************************************************** ******************
Due to the volume of email that I receive, I may not not be able to
reply to emails sent to my account. Please post a followup instead.
************************************************** ******************

"John Smith" <> writes:
>I have a couple of 2501 routers each with a bri interface. Is it possible
>for simulate isdn bri conection, ddr routing and such?


No, BRI requires one end to act as a switch, and the client CPE
communicates with the ISDN switch. THe cisco can't be made into an
ISDN switch, so you'll need something that can be, like an Adtran
Atlas box with the proper cards, or a more basic ISDN simulator.
--
Doug McIntyre
Network Engineer/Jack of All Trades
Vector Internet Services, Inc.

Can you recomend a good isdn sim or would I find it in a sim like boston
simulator?

THanks

John

"Doug McIntyre" <> wrote in message
news:41241b92$0$8077$. ..
> "John Smith" <> writes:
> >I have a couple of 2501 routers each with a bri interface. Is it
possible
> >for simulate isdn bri conection, ddr routing and such?
>
>
> No, BRI requires one end to act as a switch, and the client CPE
> communicates with the ISDN switch. THe cisco can't be made into an
> ISDN switch, so you'll need something that can be, like an Adtran
> Atlas box with the proper cards, or a more basic ISDN simulator.
> --
> Doug McIntyre
> Network Engineer/Jack of All Trades
> Vector Internet Services, Inc.

The ISDN Simulator is a piece of hardware.
VConsole is a good one.
The prices range from about 300 to 1000$

On Wed, 18 Aug 2004 21:31:04 -0700, John Smith wrote:

> Can you recomend a good isdn sim or would I find it in a sim like boston
> simulator?
>
> THanks
>
> John
>
> "Doug McIntyre" <> wrote in message
> news:41241b92$0$8077$. ..
>> "John Smith" <> writes:
>> >I have a couple of 2501 routers each with a bri interface. Is it
> possible
>> >for simulate isdn bri conection, ddr routing and such?
>>
>>
>> No, BRI requires one end to act as a switch, and the client CPE
>> communicates with the ISDN switch. THe cisco can't be made into an
>> ISDN switch, so you'll need something that can be, like an Adtran
>> Atlas box with the proper cards, or a more basic ISDN simulator.
>> --
>> Doug McIntyre
>> Network Engineer/Jack of All Trades
>> Vector Internet Services, Inc.

check the www.vconsole.com
we have a large selection of ISDN simulators..

Dmitry


"John Smith" <> wrote in message news:<h2WUc.114894$sh.91807@fed1read06>...
> Can you recomend a good isdn sim or would I find it in a sim like boston
> simulator?
>
> THanks
>
> John
>
> "Doug McIntyre" <> wrote in message
> news:41241b92$0$8077$. ..
> > "John Smith" <> writes:
> > >I have a couple of 2501 routers each with a bri interface. Is it
> possible
> > >for simulate isdn bri conection, ddr routing and such?
> >
> >
> > No, BRI requires one end to act as a switch, and the client CPE
> > communicates with the ISDN switch. THe cisco can't be made into an
> > ISDN switch, so you'll need something that can be, like an Adtran
> > Atlas box with the proper cards, or a more basic ISDN simulator.
> > --
> > Doug McIntyre
> > Network Engineer/Jack of All Trades
> > Vector Internet Services, Inc.

Hi !

John Smith wrote:
> Can you recomend a good isdn sim or would I find it in a sim like boston simulator?
No way for a software, this is hardware for special electrical signals.
You have either official ISDN simulators as http://www.cheapisdn.com/,
or look for "Teles iPbx 4S0 card" like
http://cgi.ebay.de/ws/eBayISAPI.dll?...317250749&rd=1
on german ebay, so as to make your own ISDN PBX from an old PC (ISA cards).

Best regards.

--
Eric LEMAITRE
CNAM IT Engineer, MSCS
(RHCE, RHCX, CCNA, CCDA, SCJP, SCJD, SCWCD)

Hi John,

Any cheap home isdn pbx (with internal S0 bus (s/t interface)) will do. You
can get them for $100-$200 (or less ofcourse).

Erik

"John Smith" <> wrote in message
news:h2WUc.114894$sh.91807@fed1read06...
> Can you recomend a good isdn sim or would I find it in a sim like boston
> simulator?
>
> THanks
>
> John
>
> "Doug McIntyre" <> wrote in message
> news:41241b92$0$8077$. ..
> > "John Smith" <> writes:
> > >I have a couple of 2501 routers each with a bri interface. Is it
> possible
> > >for simulate isdn bri conection, ddr routing and such?
> >
> >
> > No, BRI requires one end to act as a switch, and the client CPE
> > communicates with the ISDN switch. THe cisco can't be made into an
> > ISDN switch, so you'll need something that can be, like an Adtran
> > Atlas box with the proper cards, or a more basic ISDN simulator.
> > --
> > Doug McIntyre
> > Network Engineer/Jack of All Trades
> > Vector Internet Services, Inc.
>
>

>
http://cgi.ebay.de/ws/eBayISAPI.dll?...317250749&rd=1
> on german ebay, so as to make your own ISDN PBX from an old PC (ISA
cards).
>
Hi Eric,
I'm very intested in the product above, but since the only documentation I
can find about is in german language, I'm having some troubles in finding
what exactly I need to look for.
The idea is to set up a box with at least a pri and 4 bri interfaces,
possibly some analog as well, in order to simulate various scenarios
involving access routers.
I'm pretty sure that the board you suggested could be part of my project, as
long as the companion pri board is available, but I can't find any info
about the software.
Do you know if it is shipped with the card?
If no, can you address me to the right item to look for?
It should be not bad for the sw to have lcr functionality.
Tnx,
Tosh.