Velocity Reviews - Computer Hardware Reviews

Velocity Reviews > Newsgroups > Computing > Cisco > Traffic stop on a PIX 515

Reply
Thread Tools

Traffic stop on a PIX 515

 
 
Romme
Guest
Posts: n/a
 
      07-16-2004
Hi all

I have a problem with my PIX 515 firewall.

Sometimes the traffic just stop passing for a period of time.
It can bee for 20-40 minutes.

If I log on to the PIX via serial interface, I can see it's running,
but I can't ping clients on the inside or the outside.

If I don't touch anything, the traffic will start passing agin after
sometime.

How do I trace down this problem?

My PIX info:
------------------------------------------------------
Cisco PIX Firewall Version 6.3(3)
Hardware: PIX-515, 64 MB RAM, CPU Pentium 200 MHz
Flash i28F640J5 @ 0x300, 16MB
BIOS Flash AT29C257 @ 0xfffd8000, 32KB
0: ethernet0: address is 0050.54ff.45fa, irq 10
1: ethernet1: address is 0050.54ff.45fb, irq 7
Licensed Features:
Failover: Enabled
VPN-DES: Disabled
VPN-3DES-AES: Disabled
Maximum Physical Interfaces: 6
Maximum Interfaces: 10
Cut-through Proxy: Enabled
Guards: Enabled
URL-filtering: Enabled
Inside Hosts: Unlimited
Throughput: Unlimited
IKE peers: Unlimited
Serial Number: 480130143 (0x1c9e345f)
------------------------------------------------------

Regards
/Romme


 
Reply With Quote
 
 
 
 
emma@abacho.de
Guest
Posts: n/a
 
      07-21-2004
Try to make a "show interface" and "sh log" when traffic stops. Also I
wonder that neither des nor 3des/aes are enabled on your pix.


"Romme" <ask@me> wrote in message news:<40f847f7$0$281$(E-Mail Removed) >...
> Hi all
>
> I have a problem with my PIX 515 firewall.
>
> Sometimes the traffic just stop passing for a period of time.
> It can bee for 20-40 minutes.
>
> If I log on to the PIX via serial interface, I can see it's running,
> but I can't ping clients on the inside or the outside.
>
> If I don't touch anything, the traffic will start passing agin after
> sometime.
>
> How do I trace down this problem?
>
> My PIX info:
> ------------------------------------------------------
> Cisco PIX Firewall Version 6.3(3)
> Hardware: PIX-515, 64 MB RAM, CPU Pentium 200 MHz
> Flash i28F640J5 @ 0x300, 16MB
> BIOS Flash AT29C257 @ 0xfffd8000, 32KB
> 0: ethernet0: address is 0050.54ff.45fa, irq 10
> 1: ethernet1: address is 0050.54ff.45fb, irq 7
> Licensed Features:
> Failover: Enabled
> VPN-DES: Disabled
> VPN-3DES-AES: Disabled
> Maximum Physical Interfaces: 6
> Maximum Interfaces: 10
> Cut-through Proxy: Enabled
> Guards: Enabled
> URL-filtering: Enabled
> Inside Hosts: Unlimited
> Throughput: Unlimited
> IKE peers: Unlimited
> Serial Number: 480130143 (0x1c9e345f)
> ------------------------------------------------------
>
> Regards
> /Romme

 
Reply With Quote
 
 
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
PIX 515 - can Use VPN300 Client and PIX-to-PIX VPN at the same time? Stephen M Cisco 1 11-14-2006 02:03 PM
PIX 515 to PIX 515e not passing traffic Scott Townsend Cisco 6 05-25-2006 11:03 AM
PIX 515 to PIX 515 via Internet & IPSec, should I get a VAC? Scott Townsend Cisco 8 02-22-2006 09:59 PM
How to capture internet traffic going through PIX 515? ejikn Cisco 2 04-07-2004 03:54 PM
traffic accounting per IP on a 515 PIX possible? alex Cisco 16 11-03-2003 04:32 PM



Advertisments