Velocity Reviews - Computer Hardware Reviews

Velocity Reviews > Newsgroups > Computing > Cisco > ipv6 - ipv4 nat-pt just not translating

Reply
Thread Tools

ipv6 - ipv4 nat-pt just not translating

 
 
Yamin
Guest
Posts: n/a
 
      06-29-2004
Hey guys,

I've been trying to configure a very simple case of having an IPV6
host send packets to an IPv4 host via a cisco router (LS1010...3640
series).

The setup is accepted fine. It seems re match the tutorials on the
net and the documentation, but nothing is being translated. When we
put on a monitor on the port, we're getting ipv6 packets from a port
which has been set to use ipv4.
Anyone got any ideas. I've included the script and the setup below.
I've tried many variations on these as well as other tutorials, so
forgive me if its a bit excessive at the moment.

SETUP
IPV6 HOST (hv6)------->(rv6)router(rv4)------>IPv4 HOST (hv4)
hv6 ip = fec0:1111::10/64
rv6 ip = fec0:1111::1/64
hv4 ip = 30.1.10.10
rv4 ip = 30.1.10.1
hv4 ipv6 address=2010::30

SCRIPT
**********************************************
clear ipv6 nat translation *
clear ipv6 route *
configure terminal
interface fastethernet 1/0
ipv6 address FEC0:1111::1/64
ipv6 enable
ipv6 nat
mac 00d0.c0fb.ce52
exit

interface fastethernet 1/1
ip address 30.1.10.1 255.255.255.0
ipv6 nat
exit

ipv6 nat v6v4 source 2010::1 30.1.10.1
ipv6 nat v6v4 source 2010::30 30.1.10.10
ipv6 nat v4v6 source 30.1.10.10 2010::30
ipv6 nat v4v6 source 30.1.10.1 2010::1

ipv6 nat v6v4 source FEC0:1111::2 88.8.10.10
ipv6 nat v6v4 source FEC0:1111::1 88.8.10.1
ipv6 nat v4v6 source 88.8.10.10 FEC0:1111::2
ipv6 nat v4v6 source 88.8.10.1 FEC0:1111::1
exit
show ipv6 nat translations
**********************************************
 
Reply With Quote
 
 
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
IPv6-IPv4 interoperability Lawrence D'Oliveiro NZ Computing 0 10-06-2008 11:39 PM
Ipv6 on a ipv4/ipv6 hostname Jesse van den Kieboom Ruby 1 06-05-2005 12:57 PM
Cisco 837, IPv4, IPv6 Philip D'Ath NZ Computing 0 02-27-2005 01:21 PM
Rmi Unicastref on a ipv4/ipv6 system Ben Java 0 09-02-2004 07:38 PM
Type Casting IPv4 and IPv6 structures to Generic Structures tweak C Programming 14 06-11-2004 02:43 PM



Advertisments