Velocity Reviews - Computer Hardware Reviews

Velocity Reviews > Newsgroups > Computing > Cisco > Cisco 53xx & Dial on deman

Reply
Thread Tools

Cisco 53xx & Dial on deman

 
 
andre
Guest
Posts: n/a
 
      06-28-2004
Hi Cisco gurus!

I use a Cisco 5300 (and a 5350) to establish up to 120 dial-out
connections
with custom satellites that understand ppp. These satellites
authenticates the Cisco.

The mean I use to do this is DDR (dial on demand routing) : when I
need to connect to one of them I configure on the fly a new dialer
(with the correct username and password), then I ping through the
terminal. The Cisco then dials and establishes the connection.
But I have some problems doing this :
- 120 lines => 120 different dialers, I would simplify it using 1
dialer;
- the delay that DDR takes to pull up an async after the ping is
not omogeneus and sometimes also doesn't work, so I have to repeat the
ping up to 3 times to have the line pulled up.

Here is the sample of an async and the corresponding dialer :

interface Dialer10
description NOTIFIER_DC_DIALER
ip address 10.133.0.253 255.255.255.0
encapsulation ppp
dialer in-band
dialer redial interval 25 attempts 4 re-enable 5
dialer map ip 10.133.0.81 name 0 broadcast 26
dialer-group 1
autodetect encapsulation ppp
no peer default ip address
no cdp enable
ppp chap hostname xxxxxxx
ppp chap password 7 xxxxxxxxxxxxxx
ppp pap sent-username xxxxxxx password 7 xxxxxxxxxxxxxx
end
!
interface Async21
description NOTIFIER_DC_ASYNC
no ip address
encapsulation ppp
dialer in-band
dialer rotary-group 10
autodetect encapsulation ppp
async mode interactive
no cdp enable
ppp chap hostname xxxxxxx
ppp chap password 7 xxxxxxxxxxxxxx
ppp pap sent-username xxxxxxx password 7 xxxxxxxxxxxxxx
end

Please help me to solve those problems.

Thanks in advance,

Andrea
 
Reply With Quote
 
 
 
 
Tatarenko Alexandr
Guest
Posts: n/a
 
      07-14-2004

"andre" <(E-Mail Removed)> wrote in message
news:(E-Mail Removed) om...
> Hi Cisco gurus!
>
> I use a Cisco 5300 (and a 5350) to establish up to 120 dial-out
> connections
> with custom satellites that understand ppp. These satellites
> authenticates the Cisco.
>
> The mean I use to do this is DDR (dial on demand routing) : when I
> need to connect to one of them I configure on the fly a new dialer
> (with the correct username and password), then I ping through the
> terminal. The Cisco then dials and establishes the connection.
> But I have some problems doing this :
> - 120 lines => 120 different dialers, I would simplify it using 1
> dialer;
> - the delay that DDR takes to pull up an async after the ping is
> not omogeneus and sometimes also doesn't work, so I have to repeat the
> ping up to 3 times to have the line pulled up.
>
> Here is the sample of an async and the corresponding dialer :
>
> interface Dialer10
> description NOTIFIER_DC_DIALER
> ip address 10.133.0.253 255.255.255.0
> encapsulation ppp
> dialer in-band
> dialer redial interval 25 attempts 4 re-enable 5
> dialer map ip 10.133.0.81 name 0 broadcast 26
> dialer-group 1
> autodetect encapsulation ppp
> no peer default ip address
> no cdp enable
> ppp chap hostname xxxxxxx
> ppp chap password 7 xxxxxxxxxxxxxx
> ppp pap sent-username xxxxxxx password 7 xxxxxxxxxxxxxx
> end
> !
> interface Async21
> description NOTIFIER_DC_ASYNC
> no ip address
> encapsulation ppp
> dialer in-band
> dialer rotary-group 10
> autodetect encapsulation ppp
> async mode interactive
> no cdp enable
> ppp chap hostname xxxxxxx
> ppp chap password 7 xxxxxxxxxxxxxx
> ppp pap sent-username xxxxxxx password 7 xxxxxxxxxxxxxx
> end
>
> Please help me to solve those problems.
>
> Thanks in advance,
>
> Andrea



 
Reply With Quote
 
 
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
C#.NET or VB.NET? Which one is in deman? Willy David Jr MCAD 0 01-07-2007 07:32 AM
IE options - "never dial a connection" doesnt stick - returns to "Dial whenever a network connection is not present" techman41973@yahoo.com Computer Support 2 03-08-2006 09:08 PM
Dial voipcheap from dial plan John DH UK VOIP 6 02-01-2006 09:58 PM
MSN can't find a dial-in number for dial up =?Utf-8?B?TFlTVEFZ?= Microsoft Certification 1 05-05-2004 02:15 PM
Cisco 1003 how to dial in to one isp with multiple dial strings? Matthias Fischer Cisco 4 01-21-2004 10:21 PM



Advertisments