Velocity Reviews - Computer Hardware Reviews

Velocity Reviews > Newsgroups > Computing > Cisco > Problems with our cisco 800 (cannot ping, drops connection)

Reply
Thread Tools

Problems with our cisco 800 (cannot ping, drops connection)

 
 
Erik
Guest
Posts: n/a
 
      06-24-2004
Hello,

Since i am rather a Cisco Newbie i was hoping you could maybe help me.

When connected to our router (throught the console port) i am unable
to ping anything besides my own eth address.

Also The router looses connection with our ISP. If i check the isdn
activity (sh isdn ac) it will show me that the line is still up. when
i call my ISP he tells me that the line went down.

I will post the running config of the router and the IP route.


A little explanation of our situation :

192.168.1.52 = Bordermanager
Bordermanager has 2 interfaces the 192.168.1.51 that is the private
and the public 10.1.0.1 wich communicates with the Router (router is
10.1.0.254)

Now, i cant ping the router from the bordermanager, I cant ping the
bordermanger from the router. (but these could also be Bordermanagr
settings, i am not sure because i just started working at this
company)
And weirdest of all, i can not ping any outside adress from the
routers console. No ip or domain. Only thing i can ping from the
router is the 10.1.0.254 wich is the router himselve.

Anyways. here are the configs and i hope you could direct me to the
sollutions for my ping problems

thanks in advance,

Erik.



InterNetRouter>#sh ru
Building configuration...

Current configuration : 1960 bytes
!
version 12.2
no service pad
service timestamps debug uptime
service timestamps log uptime
service password-encryption
!
hostname InterNetRouter>
!
boot system flash c800-y6-mw.122-10b.bin
enable secret 5 xxxxxxxxxxxxxxxxxxxxxxxxxx
!
ip subnet-zero
!
no ip domain-lookup
isdn switch-type basic-net3
isdn tei-negotiation first-call
!
!
!
interface Ethernet0
ip address 10.1.0.254 255.255.0.0
ip nat inside
no cdp enable
!
interface BRI0
no ip address
ip nat outside
encapsulation ppp
no keepalive
dialer rotary-group 1
isdn switch-type basic-net3
no cdp enable
!
interface Dialer1
ip address negotiated
ip nat outside
encapsulation ppp
no ip split-horizon
no keepalive
dialer in-band
dialer idle-timeout 100
dialer string 0676xxxxx
dialer hold-queue 10
dialer load-threshold 200 either
dialer-group 1
no cdp enable
ppp authentication chap pap callin
ppp chap hostname xxxxxxxx
ppp chap password 7 xxxxxxxxxxxxxx
ppp pap sent-username xxxxxxxxx password 7 xxxxxxxxx
ppp multilink
!
ip nat inside source list 1 interface Dialer1 overload
ip nat inside source static tcp 10.1.0.1 25 interface Dialer1 25
ip http server
ip classless
ip route 0.0.0.0 0.0.0.0 Dialer1
ip route 192.168.1.0 255.255.255.0 10.1.0.1
!
access-list 1 permit any
dialer-list 1 protocol ip permit
no cdp run
banner motd ^C
################################################## #################
#
#
#
#
# You are connected to a restricted system of a private network.
#
# The login is only allowed to authorized users!
#
#
#
################################################## #################
^C
!
line con 0
exec-timeout 0 0
stopbits 1
line vty 0 4
password 7 xxxxxxxxxxx
login
!
no rcapi server
!
!
end






The IP Route :


InterNetRouter>#sh ip route
Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B -
BGP
D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP
i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS
inter area
* - candidate default, U - per-user static route, o - ODR
P - periodic downloaded static route

Gateway of last resort is 0.0.0.0 to network 0.0.0.0

213.75.178.0/32 is subnetted, 1 subnets
C 213.75.178.196 is directly connected, Dialer1
10.0.0.0/16 is subnetted, 1 subnets
C 10.1.0.0 is directly connected, Ethernet0
S 192.168.1.0/24 [1/0] via 10.1.0.1
195.121.0.0/32 is subnetted, 1 subnets
C 195.121.0.174 is directly connected, Dialer1
S* 0.0.0.0/0 is directly connected, Dialer1
 
Reply With Quote
 
 
 
 
Guest
Posts: n/a
 
      06-28-2004
No One ?


"Erik" <(E-Mail Removed)> schreef in bericht
news:(E-Mail Removed) om...
> Hello,
>
> Since i am rather a Cisco Newbie i was hoping you could maybe help me.
>
> When connected to our router (throught the console port) i am unable
> to ping anything besides my own eth address.
>
> Also The router looses connection with our ISP. If i check the isdn
> activity (sh isdn ac) it will show me that the line is still up. when
> i call my ISP he tells me that the line went down.
>
> I will post the running config of the router and the IP route.
>
>
> A little explanation of our situation :
>
> 192.168.1.52 = Bordermanager
> Bordermanager has 2 interfaces the 192.168.1.51 that is the private
> and the public 10.1.0.1 wich communicates with the Router (router is
> 10.1.0.254)
>
> Now, i cant ping the router from the bordermanager, I cant ping the
> bordermanger from the router. (but these could also be Bordermanagr
> settings, i am not sure because i just started working at this
> company)
> And weirdest of all, i can not ping any outside adress from the
> routers console. No ip or domain. Only thing i can ping from the
> router is the 10.1.0.254 wich is the router himselve.
>
> Anyways. here are the configs and i hope you could direct me to the
> sollutions for my ping problems
>
> thanks in advance,
>
> Erik.
>
>
>
> InterNetRouter>#sh ru
> Building configuration...
>
> Current configuration : 1960 bytes
> !
> version 12.2
> no service pad
> service timestamps debug uptime
> service timestamps log uptime
> service password-encryption
> !
> hostname InterNetRouter>
> !
> boot system flash c800-y6-mw.122-10b.bin
> enable secret 5 xxxxxxxxxxxxxxxxxxxxxxxxxx
> !
> ip subnet-zero
> !
> no ip domain-lookup
> isdn switch-type basic-net3
> isdn tei-negotiation first-call
> !
> !
> !
> interface Ethernet0
> ip address 10.1.0.254 255.255.0.0
> ip nat inside
> no cdp enable
> !
> interface BRI0
> no ip address
> ip nat outside
> encapsulation ppp
> no keepalive
> dialer rotary-group 1
> isdn switch-type basic-net3
> no cdp enable
> !
> interface Dialer1
> ip address negotiated
> ip nat outside
> encapsulation ppp
> no ip split-horizon
> no keepalive
> dialer in-band
> dialer idle-timeout 100
> dialer string 0676xxxxx
> dialer hold-queue 10
> dialer load-threshold 200 either
> dialer-group 1
> no cdp enable
> ppp authentication chap pap callin
> ppp chap hostname xxxxxxxx
> ppp chap password 7 xxxxxxxxxxxxxx
> ppp pap sent-username xxxxxxxxx password 7 xxxxxxxxx
> ppp multilink
> !
> ip nat inside source list 1 interface Dialer1 overload
> ip nat inside source static tcp 10.1.0.1 25 interface Dialer1 25
> ip http server
> ip classless
> ip route 0.0.0.0 0.0.0.0 Dialer1
> ip route 192.168.1.0 255.255.255.0 10.1.0.1
> !
> access-list 1 permit any
> dialer-list 1 protocol ip permit
> no cdp run
> banner motd ^C
> ################################################## #################
> #
> #
> #
> #
> # You are connected to a restricted system of a private network.
> #
> # The login is only allowed to authorized users!
> #
> #
> #
> ################################################## #################
> ^C
> !
> line con 0
> exec-timeout 0 0
> stopbits 1
> line vty 0 4
> password 7 xxxxxxxxxxx
> login
> !
> no rcapi server
> !
> !
> end
>
>
>
>
>
>
> The IP Route :
>
>
> InterNetRouter>#sh ip route
> Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B -
> BGP
> D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
> N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
> E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP
> i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS
> inter area
> * - candidate default, U - per-user static route, o - ODR
> P - periodic downloaded static route
>
> Gateway of last resort is 0.0.0.0 to network 0.0.0.0
>
> 213.75.178.0/32 is subnetted, 1 subnets
> C 213.75.178.196 is directly connected, Dialer1
> 10.0.0.0/16 is subnetted, 1 subnets
> C 10.1.0.0 is directly connected, Ethernet0
> S 192.168.1.0/24 [1/0] via 10.1.0.1
> 195.121.0.0/32 is subnetted, 1 subnets
> C 195.121.0.174 is directly connected, Dialer1
> S* 0.0.0.0/0 is directly connected, Dialer1



 
Reply With Quote
 
 
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
write a regex matches 800-555-1212, 555-1212, and also (800) 555-1212. iMath Python 15 09-29-2012 11:26 PM
Wireless Connection Drops, then connects, drops... garywi Wireless Networking 1 02-12-2009 02:26 PM
Using SB-800 to trigger other SB-800 using D1 cameras [BnH] Digital Photography 3 09-24-2005 09:47 PM
Can I have 2 IP addresses on our internal interface on our cisco pix firewall bgamblin@spvg.com Cisco 1 09-08-2005 08:54 PM
Cisco 800 L1/L3 problems - Cisco defect or something else? john doe Cisco 0 11-09-2003 08:02 AM



Advertisments