«

Does anybody know if it's possible to use multiple dialer profiles on an 827
for connecting to different DSL endpoints?

I'm trying to use time-based ACLs to connect it to my work VPN connection
during business hours and to my residential DSL provider after hours, but
as far as I can tell it will only let me use the Dialer0 profile. The
instant the time based ACL kicks in and tries to use the Dialer1 profile I
start getting a string of "No dialer string defined" if I do "debug dialer"

The IOS rev is C820-K8OSY6-M 12.2(2)T4

My current configuration is below.

P.







Current configuration : 2715 bytes
!
! Last configuration change at 22:42:42 BST Fri May 28 2004
! NVRAM config last updated at 21:03:28 BST Fri May 28 2004
!
version 12.2
no parser cache
no service single-slot-reload-enable
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
service udp-small-servers
service tcp-small-servers
!
hostname spark
!
logging buffered 4096 debugging
logging rate-limit console 10 except errors
enable secret 5 <DELETED>
enable password 7 <DELETED>
!
clock summer-time BST recurring last Sun Mar 2:00 last Sun Oct 2:00
ip subnet-zero
no ip domain-lookup
ip domain-name <DELETED>
ip name-server 195.129.15.2
ip name-server 212.13.197.5
!
ip ssh time-out 120
ip ssh authentication-retries 3
no ip dhcp-client network-discovery
!
!
interface Ethernet0
ip address 192.168.1.251 255.255.255.0
ip nat inside
ip route-cache same-interface
no ip mroute-cache
no cdp enable
hold-queue 32 in
ip rsvp bandwidth 128 64

interface ATM0
no ip address
no ip mroute-cache
no atm ilmi-keepalive
pvc 0/16 ilmi
!
pvc 0/38
encapsulation aal5mux ppp dialer
dialer pool-member 1
!
bundle-enable
dsl operating-mode auto
hold-queue 224 in
!
interface Dialer0
ip address negotiated
ip nat outside
encapsulation ppp
no ip mroute-cache
dialer pool 1
dialer-group 1
no cdp enable
ppp authentication chap callin
ppp chap hostname <DELETED>
ppp chap password 7 <DELETED>
!
int Dialer1
ip address negotiated
encaps ppp
no ip mroute-cache
dialer pool 1
dialer-group 2
no cdp enable
ppp pap chap callin
ppp pap sent-username <USERNAME> password <PASSWORD>
ppp chap hostname <DELETED>
ppp chap password 7 <DELETED>

ip nat inside source list 101 interface Dialer0 overload
ip classless
ip route profile
ip route 0.0.0.0 0.0.0.0 Dialer0
ip route 0.0.0.0 0.0.0.0 192.168.1.253 64
ip route 192.168.0.0 255.255.255.0 192.168.1.254
no ip http server
!
logging trap warnings
logging facility local6
logging source-interface Ethernet0
logging 10.1.0.4
logging 192.168.0.3
access-list 101 permit ip 192.0.0.0 0.255.255.255 any
access-list 102 remark ACL for Work Time
access-list 102 permit ip any any time-range only-during-work-hours
access-list 103 remark ACL for Play Time
access-list 103 permit ip any any time-range playtime
dialer-list 1 protocol ip list 103
dialer-list 2 protocol ip list 102
no cdp run
!
line con 0
exec-timeout 120 0
stopbits 1
line vty 0 4
exec-timeout 0 0
password 7 <DELETED>
login
!
scheduler max-task-time 5000
sntp server 192.168.0.254
time-range only-during-work-hours
absolute start 00:00 01 January 2004
periodic weekdays 8:30 to 18:30
!
time-range playtime
absolute start 00:00 01 January 2004
periodic weekdays 0:00 to 8:30
periodic weekdays 18:30 to 23:59
periodic Saturday 0:00 to 23:59
periodic Sunday 0:00 to 23:59
!
end