Velocity Reviews - Computer Hardware Reviews

Velocity Reviews > Newsgroups > Computing > Cisco > Cisco 1751 Router

Reply
Thread Tools

Cisco 1751 Router

 
 
Tom
Guest
Posts: n/a
 
      05-20-2004
Hi,

I have this problem with our point-to-point, it will say connected for
a very brief amount of time if I unplug from the serial and plug it
back in. We have a dedicated T1 with the exact same router on the
other side, both setup for routing. any help would greatful.


Serial1/0 is down, line protocol is down
Hardware is PQUICC with Fractional T1 CSU/DSU
Description: Connected to New_Building
Internet address is 192.168.41.2/24
MTU 1500 bytes, BW 1544 Kbit, DLY 20000 usec,
reliability 151/255, txload 1/255, rxload 1/255
Encapsulation PPP, loopback not set
LCP Closed
Closed: BRIDGECP, IPCP, CCP, CDPCP, LLC2, BACP
Last input 00:19:49, output 00:19:22, output hang never
Last clearing of "show interface" counters 00:00:10
Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops:
0
Queueing strategy: weighted fair
Output queue: 0/1000/64/0 (size/max total/threshold/drops)
Conversations 0/2/256 (active/max active/max total)
Reserved Conversations 0/0 (allocated/max allocated)
Available Bandwidth 1158 kilobits/sec
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
0 packets input, 0 bytes, 0 no buffer
Received 0 broadcasts, 0 runts, 0 giants, 0 throttles
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
0 packets output, 0 bytes, 0 underruns
0 output errors, 0 collisions, 1 interface resets
0 output buffer failures, 0 output buffers swapped out
0 carrier transitions
DCD=down DSR=up DTR=up RTS=up CTS=down
 
Reply With Quote
 
 
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
weird problem with using a Cisco 1751 as a home office router ken gallagher Cisco 3 10-24-2006 09:15 PM
flash memory for a Cisco 1751 router Mike Rahl Cisco 1 10-16-2006 07:23 PM
Bridging Cisco 1751 Routers Tom Cisco 4 05-13-2004 04:05 AM
Cisco 2600XM and 1751-V memory Rob Cisco 3 05-11-2004 09:38 AM
voip/sip at cisco 7960 and 1751 Andre Gronwald Cisco 0 11-28-2003 05:20 PM



Advertisments