Velocity Reviews - Computer Hardware Reviews

Velocity Reviews > Newsgroups > Computing > Cisco > Bridging Cisco 1751 routers

Reply
Thread Tools

Bridging Cisco 1751 routers

 
 
Tom
Guest
Posts: n/a
 
      05-11-2004
Hi all,

I need some help with bridging two Cisco 1751 routers. All I have
ever done is routing and I'm fairly new to this. I need to know the
config for bridging. I have one 1751 router with 2 t1 wic, serial 1/0
is connected by a dedicated t1 to another building. In that building
I have a Cisco 1751 with one T1 wic. I originally set this up to
route, however now it needs to be bridge. Long story, any help would
be grateful.
 
Reply With Quote
 
 
 
 
Guest
Posts: n/a
 
      05-11-2004
Get to make sure, since the 1751 is a voice router, your not doing any VoIP
on this are you?

Search Cisco's site there isn't a lot to doing this.


"Tom" <(E-Mail Removed)> wrote in message
news:(E-Mail Removed) om...
> Hi all,
>
> I need some help with bridging two Cisco 1751 routers. All I have
> ever done is routing and I'm fairly new to this. I need to know the
> config for bridging. I have one 1751 router with 2 t1 wic, serial 1/0
> is connected by a dedicated t1 to another building. In that building
> I have a Cisco 1751 with one T1 wic. I originally set this up to
> route, however now it needs to be bridge. Long story, any help would
> be grateful.



 
Reply With Quote
 
 
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
cisco routers and netgear routers Jon L. Miller Cisco 2 02-05-2005 02:49 AM
using cisco routers for bridging Jason Cisco 4 05-13-2004 10:52 PM
Bridging Cisco 1751 Routers Tom Cisco 4 05-13-2004 04:05 AM
Cisco 2600XM and 1751-V memory Rob Cisco 3 05-11-2004 09:38 AM
voip/sip at cisco 7960 and 1751 Andre Gronwald Cisco 0 11-28-2003 05:20 PM



Advertisments