Velocity Reviews - Computer Hardware Reviews

Velocity Reviews > Newsgroups > Computing > Cisco > noisy logs between 2 different CISCO machines ?

Reply
Thread Tools

noisy logs between 2 different CISCO machines ?

 
 
RJ45
Guest
Posts: n/a
 
      05-11-2004
hello, I have 1 CISCO 7206 router with a fastethernet interface.
this interface is connected to a 100Mbit/s hub on my internal LAN.

On my internal LAN then I have a Cisco catalyst 3750 with a default
VLAN defined.

On the CISCO router I have plenty of these warnings:

May 11 15:30:10 manrou 392373: 1w4d: %CDP-4-DUPLEX_MISMATCH: duplex
mismatch discovered on FastEthernet0/0 (not full duplex), with sw-v
GigabitEthernet1/0/1 (full duplex).

but the two machines (router and switch) Are not directly connected
thru a cable, they are indeed very far from each other and there are
plenty of eXtreeme switches between them.

How can I Get rid of this message ?
or how can I Solve the problem ?

thank you very much

Rick

 
Reply With Quote
 
 
 
 
Andre Wisniewski
Guest
Posts: n/a
 
      05-11-2004
On Tue, 11 May 2004 13:18:06 +0000 (UTC), RJ45 <(E-Mail Removed)>
wrote:

> hello, I have 1 CISCO 7206 router with a fastethernet interface.
> this interface is connected to a 100Mbit/s hub on my internal LAN.
>
> On my internal LAN then I have a Cisco catalyst 3750 with a default
> VLAN defined.
>
> On the CISCO router I have plenty of these warnings:
>
> May 11 15:30:10 manrou 392373: 1w4d: %CDP-4-DUPLEX_MISMATCH: duplex
> mismatch discovered on FastEthernet0/0 (not full duplex), with sw-v
> GigabitEthernet1/0/1 (full duplex).
>
> but the two machines (router and switch) Are not directly connected
> thru a cable, they are indeed very far from each other and there are
> plenty of eXtreeme switches between them.
>
> How can I Get rid of this message ?
> or how can I Solve the problem ?
>
> thank you very much
>
> Rick
>




--
Gruß Andre

--- Using Opera
 
Reply With Quote
 
 
 
 
RJ45
Guest
Posts: n/a
 
      05-11-2004



answer is....


no cdp enable

this on GigabitEthernet 1/0/1

wellseems working

thanks


On 2004-05-11, Andre Wisniewski <(E-Mail Removed)> wrote:
> On Tue, 11 May 2004 13:18:06 +0000 (UTC), RJ45 <(E-Mail Removed)>
> wrote:
>
>> hello, I have 1 CISCO 7206 router with a fastethernet interface.
>> this interface is connected to a 100Mbit/s hub on my internal LAN.
>>
>> On my internal LAN then I have a Cisco catalyst 3750 with a default
>> VLAN defined.
>>
>> On the CISCO router I have plenty of these warnings:
>>
>> May 11 15:30:10 manrou 392373: 1w4d: %CDP-4-DUPLEX_MISMATCH: duplex
>> mismatch discovered on FastEthernet0/0 (not full duplex), with sw-v
>> GigabitEthernet1/0/1 (full duplex).
>>
>> but the two machines (router and switch) Are not directly connected
>> thru a cable, they are indeed very far from each other and there are
>> plenty of eXtreeme switches between them.
>>
>> How can I Get rid of this message ?
>> or how can I Solve the problem ?
>>
>> thank you very much
>>
>> Rick
>>

>
>
>

 
Reply With Quote
 
Kevin Widner
Guest
Posts: n/a
 
      05-11-2004
Why don't you just turn off cdp? If that 7206 is your ISP router, then
you should probably turn it off on that device anyway, at least on
your public interface, but if you have mostly Extreme switches on your
network, you may as well turn off CDP alltogether.

Kevin


"Andre Wisniewski" <(E-Mail Removed)> wrote in message news:<opr7t74wjcudlqzq@ares>...
> On Tue, 11 May 2004 13:18:06 +0000 (UTC), RJ45 <(E-Mail Removed)>
> wrote:
>
> > hello, I have 1 CISCO 7206 router with a fastethernet interface.
> > this interface is connected to a 100Mbit/s hub on my internal LAN.
> >
> > On my internal LAN then I have a Cisco catalyst 3750 with a default
> > VLAN defined.
> >
> > On the CISCO router I have plenty of these warnings:
> >
> > May 11 15:30:10 manrou 392373: 1w4d: %CDP-4-DUPLEX_MISMATCH: duplex
> > mismatch discovered on FastEthernet0/0 (not full duplex), with sw-v
> > GigabitEthernet1/0/1 (full duplex).
> >
> > but the two machines (router and switch) Are not directly connected
> > thru a cable, they are indeed very far from each other and there are
> > plenty of eXtreeme switches between them.
> >
> > How can I Get rid of this message ?
> > or how can I Solve the problem ?
> >
> > thank you very much
> >
> > Rick
> >

 
Reply With Quote
 
mh
Guest
Posts: n/a
 
      05-11-2004
Disable CDP

conf t
no cdp run
exit
 
Reply With Quote
 
 
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
noisy cpu fan, I replaced with another and it is still noisy Ed Computer Support 3 01-23-2007 07:08 PM
WinXP Home SP2 logs in then right away logs off Andrew Computer Support 15 10-19-2004 09:45 AM
Win XP SP2 Logs in then Logs out awallwork at sign gmail dot com Computer Support 2 10-16-2004 08:19 PM
Win XP SP2 Logs in then Logs out Andrew Computer Support 2 10-16-2004 04:27 PM
WinXP Home SP2 Logs on then Logs off awallwork at sign gmail dot com Computer Support 2 10-16-2004 02:28 AM



Advertisments