|
|
|
|
05-06-2004, 11:38 AM
|
#1 |
AUX port config
I have a Cisco Router with a Modem attached to the AUX port. Firstly is it
the same cross over cable used for a Consol or is it different? Any links or info on the configuration? Second part is how do I configure the router to allow a remote caller with HyperTerm or other Terminal program dial and connect and configure the router? Any suggestions welcome. Regards, Shane Shane Malden |
|
|
|
05-06-2004, 02:56 PM
|
#2 |
|
Posts: n/a
|
Re: AUX port config
see
http://cco.cisco.com/en/US/customer/...80094bbc.shtml use "show line" to find out what line your AUX port is on. it maybe on line 1; if so then use 2001 for reverse telnet to connect to modem to issue at commands. mh |
|
|
 |
| Thread Tools | Search this Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Can not access console port of Cisco 7200 vxr | mansurbd | Hardware | 1 | 01-12-2009 06:53 PM |
| How to check current event and port status for Aliwei FXO gateway | Robin wang | Hardware | 0 | 04-11-2008 09:54 AM |
| Port 445: Effective/Safe Blocking | Samwise | General Help Related Topics | 0 | 01-06-2008 09:19 PM |
| Long, regarding a "lost" COM port | smackedass | A+ Certification | 4 | 02-05-2007 04:55 PM |
| non plug and play device on com port? | David K | A+ Certification | 1 | 07-18-2003 08:38 PM |
