Velocity Reviews - Computer Hardware Reviews

Velocity Reviews > Newsgroups > Computing > Cisco > 1602 Boot Error IP FW Plus IPSEC 56 Feature Pack

Reply
Thread Tools

1602 Boot Error IP FW Plus IPSEC 56 Feature Pack

 
 
Craig Cordts
Guest
Posts: n/a
 
      04-20-2004
Hey Folks -

I picked up a 8 MB Flash with a IP FW Plus IPSEC 56 Feature Pack image on it
to do some testing on my 1602 lab
routers. I added a 8 MB SIMM to accommodate the newer IOS but unfortunately
I get the following error when the router boots. I am not sure if the SIMM I
put in is parity checking or not but it seems to work with the older IOS
(12.0). I am not sure if the router crash is a problem with SIMM I put in or
something funking with the FLASH/IOS I am trying to load. This is the IOS
image on the FLASH: c1600-k8osy-mz.123-5a.bin

Anyone else running the IP FW Plus IPSEC 56 Feature Pack on a 1602 ? If so,
how much RAM are you running.

%QUICC_ETHER-1-LOSTCARR: Unit 0, lost carrier. Transceiver problem?
%SYS-6-BOOT_MESSAGES: Messages above this line are from the boot loader.
program load complete, entry point: 0x2005000, size: 0x69771b
Self decompressing the image :
#################################################
#################### [OK]

Unexpected exception to CPU vector 2, PC = 2DE111A

-Traceback= 2DE111A

*** EXCEPTION ***
exception number = 443
program counter = 0xde0002f2
status register = 0x2700
vbr at time of exception = 0x4000000

monitor: command "boot" aborted due to exception

Craig


 
Reply With Quote
 
 
 
 
News Account
Guest
Posts: n/a
 
      04-20-2004
That release is for a 160xR - the "mz" in the file name tells me it is runs
in memory and is zipped. The 160x file name has an "l" instead of "mz" in
the file name and is a different image.

If you have a 1602R then you need 24MB RAM and 16MB Flash to run it.

Don Woodward


"Craig Cordts" <(E-Mail Removed)> wrote in message
news:(E-Mail Removed)...
> Hey Folks -
>
> I picked up a 8 MB Flash with a IP FW Plus IPSEC 56 Feature Pack image on

it
> to do some testing on my 1602 lab
> routers. I added a 8 MB SIMM to accommodate the newer IOS but

unfortunately
> I get the following error when the router boots. I am not sure if the SIMM

I
> put in is parity checking or not but it seems to work with the older IOS
> (12.0). I am not sure if the router crash is a problem with SIMM I put in

or
> something funking with the FLASH/IOS I am trying to load. This is the IOS
> image on the FLASH: c1600-k8osy-mz.123-5a.bin
>
> Anyone else running the IP FW Plus IPSEC 56 Feature Pack on a 1602 ? If

so,
> how much RAM are you running.
>
> %QUICC_ETHER-1-LOSTCARR: Unit 0, lost carrier. Transceiver problem?
> %SYS-6-BOOT_MESSAGES: Messages above this line are from the boot loader.
> program load complete, entry point: 0x2005000, size: 0x69771b
> Self decompressing the image :
> #################################################
> #################### [OK]
>
> Unexpected exception to CPU vector 2, PC = 2DE111A
>
> -Traceback= 2DE111A
>
> *** EXCEPTION ***
> exception number = 443
> program counter = 0xde0002f2
> status register = 0x2700
> vbr at time of exception = 0x4000000
>
> monitor: command "boot" aborted due to exception
>
> Craig
>
>




 
Reply With Quote
 
 
 
 
Ben
Guest
Posts: n/a
 
      04-25-2004
The IOS will tell you if you haven't got enough memory at startup.
You definately don't have enough RAM but the error makes me think the RAM
may be dodgy.

"News Account" <(E-Mail Removed)> wrote in message
news:bnfhc.28308$(E-Mail Removed)...
> That release is for a 160xR - the "mz" in the file name tells me it is

runs
> in memory and is zipped. The 160x file name has an "l" instead of "mz" in
> the file name and is a different image.
>
> If you have a 1602R then you need 24MB RAM and 16MB Flash to run it.
>
> Don Woodward
>
>
> "Craig Cordts" <(E-Mail Removed)> wrote in message
> news:(E-Mail Removed)...
> > Hey Folks -
> >
> > I picked up a 8 MB Flash with a IP FW Plus IPSEC 56 Feature Pack image

on
> it
> > to do some testing on my 1602 lab
> > routers. I added a 8 MB SIMM to accommodate the newer IOS but

> unfortunately
> > I get the following error when the router boots. I am not sure if the

SIMM
> I
> > put in is parity checking or not but it seems to work with the older IOS
> > (12.0). I am not sure if the router crash is a problem with SIMM I put

in
> or
> > something funking with the FLASH/IOS I am trying to load. This is the

IOS
> > image on the FLASH: c1600-k8osy-mz.123-5a.bin
> >
> > Anyone else running the IP FW Plus IPSEC 56 Feature Pack on a 1602 ? If

> so,
> > how much RAM are you running.
> >
> > %QUICC_ETHER-1-LOSTCARR: Unit 0, lost carrier. Transceiver problem?
> > %SYS-6-BOOT_MESSAGES: Messages above this line are from the boot loader.
> > program load complete, entry point: 0x2005000, size: 0x69771b
> > Self decompressing the image :
> > #################################################
> > #################### [OK]
> >
> > Unexpected exception to CPU vector 2, PC = 2DE111A
> >
> > -Traceback= 2DE111A
> >
> > *** EXCEPTION ***
> > exception number = 443
> > program counter = 0xde0002f2
> > status register = 0x2700
> > vbr at time of exception = 0x4000000
> >
> > monitor: command "boot" aborted due to exception
> >
> > Craig
> >
> >

>
>
>



 
Reply With Quote
 
News Account
Guest
Posts: n/a
 
      04-25-2004
The IOS probably will not give a insufficient memory error if he is using
the wrong image.

He needs to make sure he's using the image he has in a 160xR and not a
160x - the images _are_ different.

Don Woodward


"Ben" <(E-Mail Removed)> wrote in message
news:mqKic.9268$(E-Mail Removed)...
> The IOS will tell you if you haven't got enough memory at startup.
> You definately don't have enough RAM but the error makes me think the RAM
> may be dodgy.
>
> "News Account" <(E-Mail Removed)> wrote in message
> news:bnfhc.28308$(E-Mail Removed)...
> > That release is for a 160xR - the "mz" in the file name tells me it is

> runs
> > in memory and is zipped. The 160x file name has an "l" instead of "mz"

in
> > the file name and is a different image.
> >
> > If you have a 1602R then you need 24MB RAM and 16MB Flash to run it.
> >
> > Don Woodward
> >
> >
> > "Craig Cordts" <(E-Mail Removed)> wrote in message
> > news:(E-Mail Removed)...
> > > Hey Folks -
> > >
> > > I picked up a 8 MB Flash with a IP FW Plus IPSEC 56 Feature Pack image

> on
> > it
> > > to do some testing on my 1602 lab
> > > routers. I added a 8 MB SIMM to accommodate the newer IOS but

> > unfortunately
> > > I get the following error when the router boots. I am not sure if the

> SIMM
> > I
> > > put in is parity checking or not but it seems to work with the older

IOS
> > > (12.0). I am not sure if the router crash is a problem with SIMM I put

> in
> > or
> > > something funking with the FLASH/IOS I am trying to load. This is the

> IOS
> > > image on the FLASH: c1600-k8osy-mz.123-5a.bin
> > >
> > > Anyone else running the IP FW Plus IPSEC 56 Feature Pack on a 1602 ?

If
> > so,
> > > how much RAM are you running.
> > >
> > > %QUICC_ETHER-1-LOSTCARR: Unit 0, lost carrier. Transceiver problem?
> > > %SYS-6-BOOT_MESSAGES: Messages above this line are from the boot

loader.
> > > program load complete, entry point: 0x2005000, size: 0x69771b
> > > Self decompressing the image :
> > > #################################################
> > > #################### [OK]
> > >
> > > Unexpected exception to CPU vector 2, PC = 2DE111A
> > >
> > > -Traceback= 2DE111A
> > >
> > > *** EXCEPTION ***
> > > exception number = 443
> > > program counter = 0xde0002f2
> > > status register = 0x2700
> > > vbr at time of exception = 0x4000000
> > >
> > > monitor: command "boot" aborted due to exception
> > >
> > > Craig
> > >
> > >

> >
> >
> >

>
>




 
Reply With Quote
 
 
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
1602 to Telco Connection Kirk Goins Cisco 0 10-11-2005 03:28 AM
1602 Router/ No IOS Tom Gudmundsen Cisco 2 07-30-2005 04:55 PM
Port forwarding on a 1602 Kevin Schroeder Cisco 2 07-26-2004 01:51 PM
Connecting Cisco 1602 to 2524 router Lowell Cisco 2 10-21-2003 11:52 PM
Newbie with a 1602 - a dangerous combination Simon Telrenner Cisco 2 10-16-2003 07:06 AM



Advertisments