«

all

I inherited at a customer site a Cisco Catalyst 6500 series switch that
hasn't been touched in about a year. My customer wants to use the switch for
his 10/100/1000 internal LAN.....I have no experience with a switch like
this. The switch 'has' the appropriate Ethernet cards in the slots. The
terminal I'm plugged into has on the same slot card a PCMCIA card is
installed also.

I have the Cisco terminal cable hooked to a Windows Hyperterminal session,
upon hitting enter I get to a cursor. What I need to figure out is

how to assign the ports the proper speed for the workstations attached to
it......I need at a minimum

20 - 100mb full duplex ports
and
5-1000mb ports

if anyone has experience with this Switch, all help graciously accepted.

--

Rich

Frustrate the evildoers, lead a good and prosperous life


my AOL instant messenger shhhbalto

All that is needed for evil to triumph is for good people to stand by and do
nothing.....Edmund Burke









__________________________________________________ _____________________________
Posted Via Uncensored-News.Com - Accounts Starting At $6.95 - http://www.uncensored-news.com
<><><><><><><> The Worlds Uncensored News Source <><><><><><><><>

In article <>,
says...
> all
>
> I inherited at a customer site a Cisco Catalyst 6500 series switch that
> hasn't been touched in about a year. My customer wants to use the switch for
> his 10/100/1000 internal LAN.....I have no experience with a switch like
> this. The switch 'has' the appropriate Ethernet cards in the slots. The
> terminal I'm plugged into has on the same slot card a PCMCIA card is
> installed also.
>
> I have the Cisco terminal cable hooked to a Windows Hyperterminal session,
> upon hitting enter I get to a cursor. What I need to figure out is
>
> how to assign the ports the proper speed for the workstations attached to
> it......I need at a minimum
>
> 20 - 100mb full duplex ports
> and
> 5-1000mb ports
>
> if anyone has experience with this Switch, all help graciously accepted.


set port speed 2/1-48 100
set port duplex 2/1-48 full

or

set port speed 2/5 100
You get the idea.

Also, you'll need to assign it to a proper vlan (if you have any)


--

hsb

"Somehow I imagined this experience would be more rewarding" Calvin
*************** USE ROT13 TO SEE MY EMAIL ADDRESS ****************
************************************************** ******************
Due to the volume of email that I receive, I may not not be able to
reply to emails sent to my account. Please post a followup instead.
************************************************** ******************