Velocity Reviews - Computer Hardware Reviews

Velocity Reviews > Newsgroups > Computing > Cisco > Pix publishing

Reply
Thread Tools

Pix publishing

 
 
Guest
Posts: n/a
 
      04-05-2004
Yes

"KieranK" <(E-Mail Removed)> wrote in message
news:(E-Mail Removed) om...
> Hello,
> Is it possible to publish two internal servers (smtp and http) to one
> external ip address on the PIX.
> xxx.yyy.10.20:25 -> 192.168.1.1:25
> xxx.yyy.10.20:80 -> 192.168.1.2:80
> I know this was possible on our old ISA Server.
>
> Thanks in advance
>
> KieranK



 
Reply With Quote
 
 
 
 
KieranK
Guest
Posts: n/a
 
      04-05-2004
Hello,
Is it possible to publish two internal servers (smtp and http) to one
external ip address on the PIX.
xxx.yyy.10.20:25 -> 192.168.1.1:25
xxx.yyy.10.20:80 -> 192.168.1.2:80
I know this was possible on our old ISA Server.

Thanks in advance

KieranK
 
Reply With Quote
 
 
 
 
jmark
Guest
Posts: n/a
 
      04-05-2004
Hi,
you should use port redirection. It goes something like this:
! http i redirected to some internal address
static (inside,outside) tcp 200.200.200.10 80 10.1.1.4 80 netmask
255.25.255.255
! telnet to a pix public address is redirected to a internal telnet server
static (inside,outside) tcp interface 25 10.1.1.5 23 netmask 255.255.255.255

hope this helps,
jura


"KieranK" <(E-Mail Removed)> wrote in message
news:(E-Mail Removed) om...
> Hello,
> Is it possible to publish two internal servers (smtp and http) to one
> external ip address on the PIX.
> xxx.yyy.10.20:25 -> 192.168.1.1:25
> xxx.yyy.10.20:80 -> 192.168.1.2:80
> I know this was possible on our old ISA Server.
>
> Thanks in advance
>
> KieranK



 
Reply With Quote
 
Walter Roberson
Guest
Posts: n/a
 
      04-05-2004
In article <c4sa2g$pnu$(E-Mail Removed)>, jmark <(E-Mail Removed)> wrote:
:you should use port redirection. It goes something like this:
:! http i redirected to some internal address
:static (inside,outside) tcp 200.200.200.10 80 10.1.1.4 80 netmask
:255.25.255.255
:! telnet to a pix public address is redirected to a internal telnet server
:static (inside,outside) tcp interface 25 10.1.1.5 23 netmask 255.255.255.255

No, that's telnet to the PIX's smtp port being redirected to an
internal telnet server. Kind of a strange thing to do, but I guess
it confuses spammers...


You can't directly redirect telnet to the PIX outside address itself
on current versions of PIX software -- telnet and one other port in the
1700 range are reserved on the PIX outside IP.
--
Suppose there was a test you could take that would report whether
you had Free Will or were Pre-Destined. Would you take the test?
 
Reply With Quote
 
KieranK
Guest
Posts: n/a
 
      04-06-2004
Tks, but it does not quite answer my question.
Maybe my question is not clear.

example:

When I connect to external address 200.200.200.1:80 I want the pix to
reditect that to internal address 10.1.1.4:80
When I connect the the same external address but a different port
200.200.200.1:25 I want the pix to redirect that to internal address
10.1.1.5:25

One external address but redirect traffic depending on port, but not
port redirection.

Hope this makes sense.
KK


http://www.velocityreviews.com/forums/(E-Mail Removed)-cnrc.gc.ca (Walter Roberson) wrote in message news:<c4sb0a$jc3$(E-Mail Removed)>...
> In article <c4sa2g$pnu$(E-Mail Removed)>, jmark <(E-Mail Removed)> wrote:
> :you should use port redirection. It goes something like this:
> :! http i redirected to some internal address
> :static (inside,outside) tcp 200.200.200.10 80 10.1.1.4 80 netmask
> :255.25.255.255
> :! telnet to a pix public address is redirected to a internal telnet server
> :static (inside,outside) tcp interface 25 10.1.1.5 23 netmask 255.255.255.255
>
> No, that's telnet to the PIX's smtp port being redirected to an
> internal telnet server. Kind of a strange thing to do, but I guess
> it confuses spammers...
>
>
> You can't directly redirect telnet to the PIX outside address itself
> on current versions of PIX software -- telnet and one other port in the
> 1700 range are reserved on the PIX outside IP.

 
Reply With Quote
 
 
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
PIX 501 Server Publishing RG Cisco 1 06-19-2008 01:21 PM
My pix selected for publishing-Scam? Robert Cunningham Digital Photography 11 09-07-2006 03:50 AM
CISCO PIX 506 re: Publishing Nfuse/OWA to Public IP David Cisco 3 06-19-2004 02:16 PM
GATOR/GAIN PUBLISHING/CLARIA+ PIX ACL jonnah Cisco 4 05-02-2004 12:46 AM
PIX to PIX to PIX meshed VPN Richard Cisco 1 11-15-2003 07:41 AM



Advertisments