Velocity Reviews - Computer Hardware Reviews

Velocity Reviews > Newsgroups > Computing > Cisco > cisco t1 gw with many fxs endpoint - radius (radiator) -urgent help sorry

Reply
Thread Tools

cisco t1 gw with many fxs endpoint - radius (radiator) -urgent help sorry

 
 
optimus
Guest
Posts: n/a
 
      04-01-2004
ALL
the cisco router gk + cisco 2600 t1 isdn gw + many fxs endpoint
the radiator (radius) is acted as a CDR server

using the radiator radacct.cgi cannot view the pstn (t1 gw) to fxs endpoint
air time.
but i can see the /var/log/radius/detail had detail on it, just the
radacct.cgi cannot show up the detail??

the radacct.cgi can show up the fxs call to pstn record clearly.

what is the best view of the detail record?


pls help

!
version 12.2
service timestamps debug datetime msec localtime
service timestamps log datetime msec localtime
no service password-encryption

!
clock timezone hk 8
voice-card 1
!
aaa new-model
!
!
aaa authentication login default line
aaa accounting connection h323 start-stop group radius
aaa session-id common
ip subnet-zero
no ip source-route


gw-accounting h323
gw-accounting h323 vsa
gw-accounting voip

radius-server host xxxxxxxxxxxxxx auth-port 1645 acct-port 1646
radius-server key mysecret
radius-server authorization permit missing Service-Type
radius-server vsa send accounting
radius-server vsa send authentication
call rsvp-sync
!
!
this is one of the example of the pstn -> fxs record, but cannot find in
http://localhost/cgi-bin/radacct.cgi


Fri Apr 2 04:09:07 2004
Acct-Session-Id = "000106F5"
Called-Station-Id = "8136"
cisco-h323-setup-time = "h323-setup-time=04:08:53.163 hk Fri Apr 2
2004"
cisco-h323-gw-id = "h323-gw-id=gw."
cisco-h323-conf-id = "h323-conf-id=3B83727E 834F11D8 82FFE9A2
3E914657"
cisco-h323-call-origin = "h323-call-origin=answer"
cisco-h323-call-type = "h323-call-type=Telephony"
cisco-avpair = "h323-incoming-conf-id=3B83727E 834F11D8 82FFE9A2
3E914657"
cisco-avpair = "subscriber=RegularLine"
cisco-avpair = "gw-rxd-cdn=ton:0,npi:0,#:8136"
cisco-avpair = "calling-party-category=9"
cisco-avpair = "transmission-medium-req=2"
cisco-avpair = "connect-progress=Call Up"
Acct-Status-Type = Start
NAS-Port-Type = Async
Cisco-NAS-Port = "ISDN-VOICE:20"
NAS-Port = 0
Service-Type = Login-User
NAS-IP-Address = xxxxxxxxx.218
Acct-Delay-Time = 0
Timestamp = 1080850147

Fri Apr 2 04:09:07 2004
Acct-Session-Id = "000106F6"
Called-Station-Id = "8136"
cisco-h323-setup-time = "h323-setup-time=04:08:53.195 hk Fri Apr 2
2004"
cisco-h323-gw-id = "h323-gw-id=gw."
cisco-h323-conf-id = "h323-conf-id=3B83727E 834F11D8 82FFE9A2
3E914657"
cisco-h323-call-origin = "h323-call-origin=originate"
cisco-h323-call-type = "h323-call-type=VoIP"
cisco-avpair = "h323-incoming-conf-id=3B83727E 834F11D8 82FFE9A2
3E914657"
cisco-avpair = "subscriber=RegularLine"
cisco-avpair = "session-protocol=cisco"
cisco-avpair = "gw-rxd-cdn=ton:0,npi:0,#:8136"
cisco-avpair = "connect-progress=Call Up"
Acct-Status-Type = Start
Service-Type = Login-User
NAS-IP-Address = xxxxxxxxxxx.218
Acct-Delay-Time = 0
Timestamp = 1080850147

Fri Apr 2 04:09:40 2004
Acct-Session-Id = "000106F5"
Called-Station-Id = "8136"
cisco-h323-setup-time = "h323-setup-time=04:08:53.163 hk Fri Apr 2
2004"
cisco-h323-gw-id = "h323-gw-id=gw."
cisco-h323-conf-id = "h323-conf-id=3B83727E 834F11D8 82FFE9A2
3E914657"
cisco-h323-call-origin = "h323-call-origin=answer"
cisco-h323-call-type = "h323-call-type=Telephony"
cisco-avpair = "h323-incoming-conf-id=3B83727E 834F11D8 82FFE9A2
3E914657"

cisco-avpair = "subscriber=RegularLine"
cisco-avpair = "gw-rxd-cdn=ton:0,npi:0,#:8136"
cisco-avpair = "calling-party-category=9"
cisco-avpair = "transmission-medium-req=2"
cisco-h323-connect-time = "h323-connect-time=04:09:01.140 hk Fri Apr
2 2004"
Acct-Input-Octets = 3765
Acct-Output-Octets = 24400
Acct-Input-Packets = 381
Acct-Output-Packets = 1220
Acct-Session-Time = 25
cisco-h323-disconnect-time = "h323-disconnect-time=04:09:25.937 hk
Fri Apr 2 2004"
cisco-h323-disconnect-cause = "h323-disconnect-cause=10"
cisco-avpair = "h323-ivr-out=Tariff:Unknown"
cisco-avpair = "release-source=1"
cisco-h323-voice-quality = "h323-voice-quality=0"
Acct-Status-Type = Stop
NAS-Port-Type = Async
Cisco-NAS-Port = "ISDN-VOICE:20"
NAS-Port = 0
Called-Station-Id = "8136"
Service-Type = Login-User
NAS-IP-Address = xxxxxxxxxxx.218
Acct-Delay-Time = 0
Timestamp = 1080850180

Fri Apr 2 04:09:42 2004
Acct-Session-Id = "000106F6"

Called-Station-Id = "8136"
cisco-h323-setup-time = "h323-setup-time=04:08:53.195 hk Fri Apr 2
2004"
cisco-h323-gw-id = "h323-gw-id=gw."
cisco-h323-conf-id = "h323-conf-id=3B83727E 834F11D8 82FFE9A2
3E914657"
cisco-h323-call-origin = "h323-call-origin=originate"
cisco-h323-call-type = "h323-call-type=VoIP"
cisco-avpair = "h323-incoming-conf-id=3B83727E 834F11D8 82FFE9A2
3E914657"
cisco-avpair = "subscriber=RegularLine"
cisco-avpair = "session-protocol=cisco"
cisco-avpair = "gw-rxd-cdn=ton:0,npi:0,#:8136"
cisco-h323-connect-time = "h323-connect-time=04:09:01.128 hk Fri Apr
2 2004"
Acct-Input-Octets = 24540
Acct-Output-Octets = 3295
Acct-Input-Packets = 1227
Acct-Output-Packets = 334
Acct-Session-Time = 27
cisco-h323-disconnect-time = "h323-disconnect-time=04:09:27.928 hk
Fri Apr 2 2004"
cisco-h323-disconnect-cause = "h323-disconnect-cause=10"
cisco-h323-remote-address = "h323-remote-address=xxxxxxxxxxx.237"
cisco-avpair = "release-source=1"
cisco-h323-voice-quality = "h323-voice-quality=11"
cisco-avpair = "alert-timepoint=04:08:53.802 hk Fri Apr 2 2004"
cisco-avpair = "remote-media-address=xxxxxxxxxxx.237"
cisco-avpair = "outgoing-area=gk.com"
cisco-avpair = "gw-final-xlated-cdn=ton:0,npi:0,#:8136"
Acct-Status-Type = Stop
Service-Type = Login-User
NAS-IP-Address = xxxxxxxxxxx.218
Acct-Delay-Time = 0
Timestamp = 1080850182




 
Reply With Quote
 
 
 
 
optimus
Guest
Posts: n/a
 
      04-01-2004
## one more remark
May be there is no user name on the cisco gw , so that no identification for
this.

How can I add a user name for this?

"optimus" <(E-Mail Removed)> wrote in message
news:c4hulu$nq5$(E-Mail Removed)...
> ALL
> the cisco router gk + cisco 2600 t1 isdn gw + many fxs endpoint
> the radiator (radius) is acted as a CDR server
>
> using the radiator radacct.cgi cannot view the pstn (t1 gw) to fxs

endpoint
> air time.
> but i can see the /var/log/radius/detail had detail on it, just the
> radacct.cgi cannot show up the detail??
>
> the radacct.cgi can show up the fxs call to pstn record clearly.
>
> what is the best view of the detail record?
>
>
> pls help
>
> !
> version 12.2
> service timestamps debug datetime msec localtime
> service timestamps log datetime msec localtime
> no service password-encryption
>
> !
> clock timezone hk 8
> voice-card 1
> !
> aaa new-model
> !
> !
> aaa authentication login default line
> aaa accounting connection h323 start-stop group radius
> aaa session-id common
> ip subnet-zero
> no ip source-route
>
>
> gw-accounting h323
> gw-accounting h323 vsa
> gw-accounting voip
>
> radius-server host xxxxxxxxxxxxxx auth-port 1645 acct-port 1646
> radius-server key mysecret
> radius-server authorization permit missing Service-Type
> radius-server vsa send accounting
> radius-server vsa send authentication
> call rsvp-sync
> !
> !
> this is one of the example of the pstn -> fxs record, but cannot find in
> http://localhost/cgi-bin/radacct.cgi
>
>
> Fri Apr 2 04:09:07 2004
> Acct-Session-Id = "000106F5"
> Called-Station-Id = "8136"
> cisco-h323-setup-time = "h323-setup-time=04:08:53.163 hk Fri Apr 2
> 2004"
> cisco-h323-gw-id = "h323-gw-id=gw."
> cisco-h323-conf-id = "h323-conf-id=3B83727E 834F11D8 82FFE9A2
> 3E914657"
> cisco-h323-call-origin = "h323-call-origin=answer"
> cisco-h323-call-type = "h323-call-type=Telephony"
> cisco-avpair = "h323-incoming-conf-id=3B83727E 834F11D8 82FFE9A2
> 3E914657"
> cisco-avpair = "subscriber=RegularLine"
> cisco-avpair = "gw-rxd-cdn=ton:0,npi:0,#:8136"
> cisco-avpair = "calling-party-category=9"
> cisco-avpair = "transmission-medium-req=2"
> cisco-avpair = "connect-progress=Call Up"
> Acct-Status-Type = Start
> NAS-Port-Type = Async
> Cisco-NAS-Port = "ISDN-VOICE:20"
> NAS-Port = 0
> Service-Type = Login-User
> NAS-IP-Address = xxxxxxxxx.218
> Acct-Delay-Time = 0
> Timestamp = 1080850147
>
> Fri Apr 2 04:09:07 2004
> Acct-Session-Id = "000106F6"
> Called-Station-Id = "8136"
> cisco-h323-setup-time = "h323-setup-time=04:08:53.195 hk Fri Apr 2
> 2004"
> cisco-h323-gw-id = "h323-gw-id=gw."
> cisco-h323-conf-id = "h323-conf-id=3B83727E 834F11D8 82FFE9A2
> 3E914657"
> cisco-h323-call-origin = "h323-call-origin=originate"
> cisco-h323-call-type = "h323-call-type=VoIP"
> cisco-avpair = "h323-incoming-conf-id=3B83727E 834F11D8 82FFE9A2
> 3E914657"
> cisco-avpair = "subscriber=RegularLine"
> cisco-avpair = "session-protocol=cisco"
> cisco-avpair = "gw-rxd-cdn=ton:0,npi:0,#:8136"
> cisco-avpair = "connect-progress=Call Up"
> Acct-Status-Type = Start
> Service-Type = Login-User
> NAS-IP-Address = xxxxxxxxxxx.218
> Acct-Delay-Time = 0
> Timestamp = 1080850147
>
> Fri Apr 2 04:09:40 2004
> Acct-Session-Id = "000106F5"
> Called-Station-Id = "8136"
> cisco-h323-setup-time = "h323-setup-time=04:08:53.163 hk Fri Apr 2
> 2004"
> cisco-h323-gw-id = "h323-gw-id=gw."
> cisco-h323-conf-id = "h323-conf-id=3B83727E 834F11D8 82FFE9A2
> 3E914657"
> cisco-h323-call-origin = "h323-call-origin=answer"
> cisco-h323-call-type = "h323-call-type=Telephony"
> cisco-avpair = "h323-incoming-conf-id=3B83727E 834F11D8 82FFE9A2
> 3E914657"
>
> cisco-avpair = "subscriber=RegularLine"
> cisco-avpair = "gw-rxd-cdn=ton:0,npi:0,#:8136"
> cisco-avpair = "calling-party-category=9"
> cisco-avpair = "transmission-medium-req=2"
> cisco-h323-connect-time = "h323-connect-time=04:09:01.140 hk Fri

Apr
> 2 2004"
> Acct-Input-Octets = 3765
> Acct-Output-Octets = 24400
> Acct-Input-Packets = 381
> Acct-Output-Packets = 1220
> Acct-Session-Time = 25
> cisco-h323-disconnect-time = "h323-disconnect-time=04:09:25.937 hk
> Fri Apr 2 2004"
> cisco-h323-disconnect-cause = "h323-disconnect-cause=10"
> cisco-avpair = "h323-ivr-out=Tariff:Unknown"
> cisco-avpair = "release-source=1"
> cisco-h323-voice-quality = "h323-voice-quality=0"
> Acct-Status-Type = Stop
> NAS-Port-Type = Async
> Cisco-NAS-Port = "ISDN-VOICE:20"
> NAS-Port = 0
> Called-Station-Id = "8136"
> Service-Type = Login-User
> NAS-IP-Address = xxxxxxxxxxx.218
> Acct-Delay-Time = 0
> Timestamp = 1080850180
>
> Fri Apr 2 04:09:42 2004
> Acct-Session-Id = "000106F6"
>
> Called-Station-Id = "8136"
> cisco-h323-setup-time = "h323-setup-time=04:08:53.195 hk Fri Apr 2
> 2004"
> cisco-h323-gw-id = "h323-gw-id=gw."
> cisco-h323-conf-id = "h323-conf-id=3B83727E 834F11D8 82FFE9A2
> 3E914657"
> cisco-h323-call-origin = "h323-call-origin=originate"
> cisco-h323-call-type = "h323-call-type=VoIP"
> cisco-avpair = "h323-incoming-conf-id=3B83727E 834F11D8 82FFE9A2
> 3E914657"
> cisco-avpair = "subscriber=RegularLine"
> cisco-avpair = "session-protocol=cisco"
> cisco-avpair = "gw-rxd-cdn=ton:0,npi:0,#:8136"
> cisco-h323-connect-time = "h323-connect-time=04:09:01.128 hk Fri

Apr
> 2 2004"
> Acct-Input-Octets = 24540
> Acct-Output-Octets = 3295
> Acct-Input-Packets = 1227
> Acct-Output-Packets = 334
> Acct-Session-Time = 27
> cisco-h323-disconnect-time = "h323-disconnect-time=04:09:27.928 hk
> Fri Apr 2 2004"
> cisco-h323-disconnect-cause = "h323-disconnect-cause=10"
> cisco-h323-remote-address = "h323-remote-address=xxxxxxxxxxx.237"
> cisco-avpair = "release-source=1"
> cisco-h323-voice-quality = "h323-voice-quality=11"
> cisco-avpair = "alert-timepoint=04:08:53.802 hk Fri Apr 2 2004"
> cisco-avpair = "remote-media-address=xxxxxxxxxxx.237"
> cisco-avpair = "outgoing-area=gk.com"
> cisco-avpair = "gw-final-xlated-cdn=ton:0,npi:0,#:8136"
> Acct-Status-Type = Stop
> Service-Type = Login-User
> NAS-IP-Address = xxxxxxxxxxx.218
> Acct-Delay-Time = 0
> Timestamp = 1080850182
>
>
>
>



 
Reply With Quote
 
 
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
connection trunk, FXS-FXS Dmitry Melekhov Cisco 1 11-22-2012 07:56 AM
endpoint vpn router to endpoint vpn router problem Mike Doty Cisco 1 10-02-2004 07:41 PM
cisco gk + tai wan fxs endpoint registration optimus Cisco 0 02-16-2004 08:15 AM
Sorry Sorry Sorry but what camera for me - Real Esate Phil Digital Photography 19 12-28-2003 05:28 PM
Cisco radius attributes with Funk Steel-Belted Radius Server David Cisco 0 11-06-2003 09:54 PM



Advertisments