Velocity Reviews - Computer Hardware Reviews

Velocity Reviews > Newsgroups > Computing > Cisco > db60 cross over cable usage

Reply
Thread Tools

db60 cross over cable usage

 
 
Paul Hardy
Guest
Posts: n/a
 
      03-03-2004
I am trying to link the serials between a 4700 and a 2503, I ahe the db60
cross over dte-dce set the 4700 clock rate to 2000000 but only the 2503 is
showing up, the 4700 never seems to see data (last input never), where am I
going wrong


Paul


 
Reply With Quote
 
 
 
 
Hansang Bae
Guest
Posts: n/a
 
      03-04-2004
In article <c25k5n$j33$(E-Mail Removed)>, Kismet1964
@btopenworld.com says...
> I am trying to link the serials between a 4700 and a 2503, I ahe the db60
> cross over dte-dce set the 4700 clock rate to 2000000 but only the 2503 is
> showing up, the 4700 never seems to see data (last input never), where am I
> going wrong



The 2503 is up/up? The 4700's serial NPs have the D shells that are
upside down. Did you plug in the cable upside down?


--

hsb

"Somehow I imagined this experience would be more rewarding" Calvin
*************** USE ROT13 TO SEE MY EMAIL ADDRESS ****************
************************************************** ******************
Due to the volume of email that I receive, I may not not be able to
reply to emails sent to my account. Please post a followup instead.
************************************************** ******************
 
Reply With Quote
 
 
 
 
Paul Hardy
Guest
Posts: n/a
 
      03-04-2004
Ok after a full day trying to work out what was wrong I tried the other
serial on the 3503, it worked straight away.
turns out the serial0 is faulty !!!

Thanks Paul
"Hansang Bae" <(E-Mail Removed)> wrote in message
news:(E-Mail Removed)...
> In article <c25k5n$j33$(E-Mail Removed)>, Kismet1964
> @btopenworld.com says...
> > I am trying to link the serials between a 4700 and a 2503, I ahe the

db60
> > cross over dte-dce set the 4700 clock rate to 2000000 but only the 2503

is
> > showing up, the 4700 never seems to see data (last input never), where

am I
> > going wrong

>
>
> The 2503 is up/up? The 4700's serial NPs have the D shells that are
> upside down. Did you plug in the cable upside down?
>
>
> --
>
> hsb
>
> "Somehow I imagined this experience would be more rewarding" Calvin
> *************** USE ROT13 TO SEE MY EMAIL ADDRESS ****************
> ************************************************** ******************
> Due to the volume of email that I receive, I may not not be able to
> reply to emails sent to my account. Please post a followup instead.
> ************************************************** ******************



 
Reply With Quote
 
 
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
VOIP over VPN over TCP over WAP over 3G Theo Markettos UK VOIP 2 02-14-2008 03:27 PM
DB60 crossover cable Tato programista Cisco 5 08-31-2006 01:17 AM
2500's DB60 to DB25 back to back Matt Cisco 0 06-16-2005 02:22 PM
DB60 to RJ45 Adaptor Howard Huntley Cisco 0 08-20-2004 07:59 PM
Layout DB60 crossover cable Godfried Boshuizen Cisco 1 02-20-2004 07:09 PM



Advertisments