Velocity Reviews - Computer Hardware Reviews

Velocity Reviews > Newsgroups > Computing > Computer Information > Review of Antec SLK3700-BQE Case

Thread Tools

Review of Antec SLK3700-BQE Case

James Hanley
Posts: n/a
In the case's favour,
* It has Slide rails for the 5.25" bays - but there are 4 holes in
each side of a 5.25" device, yet the slide rails only use the bottom
2, and you find that out by trial and error (it doesn't work in the
top 2).

* It has removable trays for the 3.5" devices - FANTASTIC

* There is also room for loads of 3.5" devices, all in removeable
trays, and beautifully located so that a front fan can blow air over
them. - Wonderful

* Removable FDD cage with a latch - GREAT

* Antec - I believe - do sell extra drive rails if need be.

* The side of the case is almost a gimmick. It has a locking mechanism
which doesn't do anything because you can actually take the side off
very easily whilst it's 'locked' (though the gimmick lock doesn't
close properly when you do that - it breaks easily) It's a very cheap

* The 5.25" rails, aren't so great. They are sturdy - the drive won't
shake in there, but they can screw in into many different positions
whilst only 1 position works. So that can cause some annoyance, since
the correct position must initially be found by trial and improvement
- and by example thereafter.
And they only make use of 2 holes on the side of the drive, not all 4.
Really Antec should have let the case have nice Trays for 5.25" drives
like they have with the 3.5" drives.

* The front of the case is a joke. I like to look at the front of the
computer and see what drives are in there. On this case, I have to
open a door to see. How stupid. And when you open the door, you see
an ugly thing, metal framework with holes. It probably has to be
closed to retain good airflow.

* The case does not support thumbscrews - at least not in the 5.25"
bays or the 3.5" bays. So if I want to unscrew or scrwe in a drive to
the rail or tray, I have to use a screwdriver. This is forgivable
because no manufacturer i've come across provides slide rails/trays
WITH thumbscrew support(since the slide must be a tight fit, there is
never any room for a thumbscrew, and at least there are removable
trays or slide rails. So you won't have to unscrew the drives that
often - unless you want the drives in another computer/case with a
different design.

To conclude,
the ability to slide 5.25 and 3.5 drives in and out is such a valuable
feature, that they outweigh the cons.
The drives in the floppy cage don't slide in and out, but the cage is
removable with a latch, and one can probably use thumbscrews to attach
the drive, so it's not a big nuisance.
I have seen drive rails available separately from antec, so I expect
antec would provide extra packs of drive rails compatible with this
case if need be. That, of course, is another valuable advantage.
Reply With Quote

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
Antec P180 case review at Silverstrand Front Page News 0 01-29-2006 03:34 AM
Antec P180 Computer Case Review at XYZ Computing Silverstrand Front Page News 0 01-19-2006 01:45 AM
Antec Sonata 2 Case Review @ Silverstrand Front Page News 0 10-05-2005 09:02 PM
Antec Sonata II Case Review at XYZ Computing Silverstrand Front Page News 2 09-08-2005 07:04 AM
Antec TX1050B Black SOHO Tower Case Review Silverstrand Front Page News 0 08-05-2005 09:50 PM