Velocity Reviews - Computer Hardware Reviews

Velocity Reviews > Newsgroups > Computing > Cisco > no dialup isdn access

Reply
Thread Tools

no dialup isdn access

 
 
charter
Guest
Posts: n/a
 
      12-20-2003
Hello all i have an as5248 has been run since 96 11.3(t ios microcom
modems. in the past week isdn modems wil not connect. connect for a second
then dead. factory default config per as5200 setup. control t1 1 will not
bring up the pri always goes to TEI etc. been run since 95ish 24/7 is it
spent? Kent


 
Reply With Quote
 
 
 
 
Rik Bain
Guest
Posts: n/a
 
      12-21-2003
On Sat, 20 Dec 2003 02:50:14 -0600, charter wrote:

> Hello all i have an as5248 has been run since 96 11.3(t ios microcom
> modems. in the past week isdn modems wil not connect. connect for a
> second then dead. factory default config per as5200 setup. control t1 1
> will not bring up the pri always goes to TEI etc. been run since 95ish
> 24/7 is it spent? Kent


lets look at "debug isdn q921" and "debug isdn q931" during call attempts
and the output of "show isdn stat"

Rik
 
Reply With Quote
 
 
 
 
Aaron Leonard
Guest
Posts: n/a
 
      12-22-2003

~ On Sat, 20 Dec 2003 02:50:14 -0600, charter wrote:
~
~ > Hello all i have an as5248 has been run since 96 11.3(t ios microcom
~ > modems. in the past week isdn modems wil not connect. connect for a
~ > second then dead. factory default config per as5200 setup. control t1 1
~ > will not bring up the pri always goes to TEI etc. been run since 95ish
~ > 24/7 is it spent? Kent
~
~ lets look at "debug isdn q921" and "debug isdn q931" during call attempts
~ and the output of "show isdn stat"
~
~ Rik

I'd mix in some "debug ppp negotiation" while you're at it.
 
Reply With Quote
 
 
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
pc with isdn modem not connecte isdn 1841 router with isdn module sync Cisco 0 06-05-2007 10:10 AM
ISDN Dialup to 2 x Seperate Routers Darren Green Cisco 2 10-29-2006 07:11 PM
ISDN DialUP User is not connecting Rajesh Cisco 1 08-01-2006 12:01 AM
Briging over ISDN Dialup Thomas Volk Cisco 4 12-10-2003 03:02 PM
Can you have failover to ISDN in a bridging environment with a standalone ISDN box? BobCov Cisco 3 11-21-2003 06:11 PM



Advertisments
 



1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57