Velocity Reviews - Computer Hardware Reviews

Velocity Reviews > Newsgroups > Computing > Cisco > flash_init on Cisco 3548

Reply
Thread Tools

flash_init on Cisco 3548

 
 
Zulkifli
Guest
Posts: n/a
 
      12-15-2003
Hi,
Has anyone encounter this problem before where the flash_init command
issued on the cisco 3548 catalyst does not respond? Means it just hangs
there?

--------------------screen shot---------------------
3500XL Boot Loader (C3500-HBOOT-M) Version 12.0(5)XU, RELEASE SOFTWARE (fc1)
Compiled Mon 03-Apr-00 17:47 by swati
starting...
Base ethernet MAC Address: 00:03:e3:3c:90:c0
Xmodem file system is available.

The system has been interrupted prior to initializing the
flash filesystem. The following commands will initialize
the flash filesystem, and finish loading the operating
system software:

flash_init
load_helper
boot

switch: load_helper
switch: flash_init
Initializing Flash...
-----------------------------------------------------

Any workaround for this? Is there a manual way for us to delete the firmware
from this switch.

Thanks
 
Reply With Quote
 
 
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Voice Vlan on Cisco XL 3548 switches bniraula Cisco 1 06-07-2010 01:59 PM
Spanning-tree, Cisco 2950 vs 2924/3548 vs HP 2824 oxaze@hotmail.com Cisco 1 03-15-2006 12:01 AM
Replace flash on a Cisco Catalyst 3548 switch Eddy Cisco 4 03-04-2005 05:23 PM
MOD/Banner on Catalyst 3548 twi2ted_pair Cisco 6 10-28-2003 10:06 AM
Reset whole config of a Cisco Catalyst 3548 XL switch Syn Cisco 1 10-17-2003 12:59 PM



Advertisments