Velocity Reviews - Computer Hardware Reviews

Velocity Reviews > Newsgroups > Computing > Cisco > PIX515 6.3 IKE

Reply
Thread Tools

PIX515 6.3 IKE

 
 
John
Guest
Posts: n/a
 
      12-13-2003
I'm setting up a VPN for remote users on a PIX515.
If I define the IKE with AES-256, SHA1, Group5 the vpn client won't
connect. If I use AES-256, SHA1, Group2 i get a warning message
saying that I should use Group5 with AES on PDM - but the client will
connect.
Does this mean that the PIX 6.3 supports AES-256, SHA1, Group5 - but
the vpn client does not?
I'm using Pre-shared keys. Am I limited by the type if I use
pre-shared keys vs. say RSA?
I've got vpn client 4.0.3c.

 
Reply With Quote
 
 
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
ike peers on pix 501 and 506 jcharth@hotmail.com Cisco 2 12-15-2005 03:12 PM
IKE PSK not shown on ASDM 5.0? AM Cisco 1 09-22-2005 04:57 PM
Main Mode IKE expiring , what's next? matteo_cardelli@yahoo.co.uk Cisco 0 08-20-2005 05:00 PM
ISAKMP / IKE: Router cert not found jt Cisco 1 05-16-2004 03:50 PM
fixup protocol esp-ike Michael Cisco 1 11-29-2003 04:16 AM



Advertisments
 



1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57