«

My PC seems to be having problems installing hardware which uses a USB
connection, it either fails to install the hardware or installs it within my
device manager with a yellow question mark, when I right click and go to
properties I get the message 'this device cannot start [code10]' or 'this
device is not configured properly, [code1]'

Even when it appears in my device manager without any apparent problems the
hardware still does not show up in my control panel and is unusable.
I have tried uninstalling and reinstalling many times but am getting
nowhere.

I would be really grateful if anyone had any ideas.

Thanks Rick

Can you tell us what you are trying to install specifically the name of the
product? Perhaps we can point you in the rite direction to get the drivers
if this is a driver problem.

Sounds like what you are trying to install is doing as it is supposed to do
but is also needing the DRIVERS (software that tells the cpu how to control
the new product) to run correctly.


--
Christech Company
"Quality computer repair on the go"!
http://www.christechcompany.com/
ICQ# 346-151-457
REMOVE NOSPAM FROM EMAIL IF
SENDING A EMAIL TO THIS ADDRESS

"Rick Sayer" <> wrote in message
news:...
> My PC seems to be having problems installing hardware which uses a USB
> connection, it either fails to install the hardware or installs it within
my
> device manager with a yellow question mark, when I right click and go to
> properties I get the message 'this device cannot start [code10]' or 'this
> device is not configured properly, [code1]'
>
> Even when it appears in my device manager without any apparent problems
the
> hardware still does not show up in my control panel and is unusable.
> I have tried uninstalling and reinstalling many times but am getting
> nowhere.
>
> I would be really grateful if anyone had any ideas.
>
> Thanks Rick
>
>