«

Greetings everyone. I've just recently began learning the PIX config
as our network guy was fired, so me being a programmer somehow got
tasked with taking over management of the PIX and setting up a VPN.
I've looked all over Cisco's site for configuration examples but my
networking ignorance has me stumped. Basically here is what our
network consist of: A PIX 515R running version 6.3.3 configured with
3 interfaces, outside, dmz, inside. I would like this to be as simple
as possible and I currently have version 4.0.2 of Cisco's VPN client.
Our people will have access to the Internet through high speed
DSL/Cable and then use the VPN to connect to the corp network for
email and such. Any help is appreciated: PIX Config is as follows:
PIX Version 6.3(3)
interface ethernet0 auto
interface ethernet1 auto
interface ethernet2 auto
nameif ethernet0 outside security0
nameif ethernet1 inside security100
nameif ethernet2 dmz security50
enable password ************ encrypted
passwd *********** encrypted
hostname thepix
fixup protocol dns maximum-length 512
no fixup protocol ftp 21
no fixup protocol h323 h225 1720
fixup protocol h323 ras 1718-1719
no fixup protocol http 80
no fixup protocol rsh 514
fixup protocol rtsp 554
no fixup protocol sip 5060
fixup protocol sip udp 5060
no fixup protocol skinny 2000
no fixup protocol smtp 25
no fixup protocol sqlnet 1521
fixup protocol tftp 69
names
access-list aclout permit tcp any host *.*.*.* eq smtp
access-list aclout permit tcp any host *.*.*.* eq imap4
access-list aclout permit tcp any host *.*.*.* eq pop3
access-list aclout permit tcp any host *.*.*.* eq www
access-list aclout permit tcp any host *.*.*.* eq https
access-list aclout permit tcp any host *.*.*.* eq domain
access-list aclout permit udp any host *.*.*.* eq domain
access-list aclout permit tcp any host *.*.*.* eq https
access-list aclout permit tcp any host *.*.*.* eq www
access-list aclout permit tcp any host *.*.*.* eq smtp
access-list aclout permit tcp any host *.*.*.* eq pop3
access-list aclout permit tcp any host *.*.*.* eq imap4
access-list aclout permit tcp any host *.*.*.* eq https
access-list aclout permit tcp any host *.*.*.* eq www
access-list aclout permit tcp any host *.*.*.* eq www
access-list aclout permit tcp any host *.*.*.* eq https
access-list aclout permit tcp any host *.*.*.* eq 13700
access-list aclout permit tcp any host *.*.*.* eq 13800
access-list aclout permit tcp any host *.*.*.* eq www
access-list aclout permit tcp any host *.*.*.* eq https
access-list aclout permit tcp any host *.*.*.* eq 13700
access-list aclout permit tcp any host *.*.*.* eq 13800
access-list aclout permit tcp any host *.*.*.* eq www
access-list aclout permit tcp any host *.*.*.* eq https
access-list acldmz permit tcp any host 10.1.1.30 eq 1433
access-list acldmz permit tcp any host 10.1.1.20 eq 1433
access-list acldmz permit tcp any host 10.1.1.22 eq 1433
access-list acldmz permit tcp any host 10.1.1.5 eq https
access-list acldmz permit tcp any host 10.1.1.5 eq www
access-list acldmz permit tcp any host 10.1.1.24 eq smtp
access-list acldmz permit tcp any host 10.1.1.4 eq netbios-ssn
access-list acldmz permit udp any host 10.1.1.4 eq netbios-ns
access-list acldmz permit udp any host 10.1.1.4 eq netbios-dgm
pager lines 14
logging on
logging console debugging
logging monitor debugging
logging buffered debugging
mtu outside 1500
mtu inside 1500
mtu dmz 1500
ip address outside *.*.*.* 255.255.255.240
ip address inside 192.168.100.27 255.255.255.0
ip address dmz 10.1.1.1 255.255.255.0
ip audit info action alarm
ip audit attack action alarm
no failover
failover timeout 0:00:00
failover poll 15
no failover ip address outside
no failover ip address inside
no failover ip address dmz
pdm history enable
arp timeout 14400
global (outside) 1 *.*.*.*-*.*.*.* netmask 255.255.255.240
global (outside) 1 *.*.*.* netmask 255.255.255.240
global (dmz) 1 10.1.1.100-10.1.1.200 netmask 255.255.255.0
nat (inside) 1 0.0.0.0 0.0.0.0 0 0
nat (dmz) 1 0.0.0.0 0.0.0.0 0 0
static (dmz,outside) *.*.*.* 10.1.1.2 netmask 255.255.255.255 0 0
static (inside,dmz) 10.1.1.20 192.168.100.46 netmask 255.255.255.255 0
0
static (inside,dmz) 10.1.1.22 192.168.100.38 netmask 255.255.255.255 0
0
static (dmz,outside) *.*.*.* 10.1.1.3 netmask 255.255.255.255 0 0
static (inside,dmz) 10.1.1.4 192.168.100.4 netmask 255.255.255.255 0 0
static (inside,dmz) 10.1.1.5 192.168.100.29 netmask 255.255.255.255 0
0
static (inside,dmz) 10.1.1.30 192.168.100.35 netmask 255.255.255.255 0
0
static (dmz,outside) *.*.*.* 10.1.1.7 netmask 255.255.255.255 0 0
static (inside,outside) *.*.*.* 192.168.100.32 netmask 255.255.255.255
0 0
static (dmz,outside) *.*.*.* 10.1.1.8 netmask 255.255.255.255 0 0
static (inside,dmz) 10.1.1.24 192.168.100.24 netmask 255.255.255.255 0
0
static (dmz,outside) *.*.*.* 10.1.1.5 netmask 255.255.255.255 0 0
static (inside,outside) *.*.*.* 192.168.100.31 netmask 255.255.255.255
0 0
access-group aclout in interface outside
access-group acldmz in interface dmz
route outside 0.0.0.0 0.0.0.0 *.*.*.* 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h225
1:00:00
timeout h323 0:05:00 mgcp 0:05:00 sip 0:30:00 sip_media 0:02:00
timeout uauth 0:05:00 absolute
aaa-server TACACS+ protocol tacacs+
aaa-server RADIUS protocol radius
aaa-server LOCAL protocol local
no snmp-server location
no snmp-server contact
snmp-server community front4309
no snmp-server enable traps
floodguard enable
telnet 192.168.100.174 255.255.255.255 inside
telnet 192.168.100.0 255.255.255.0 inside
telnet 192.168.100.0 255.255.255.0 dmz
telnet timeout 15
ssh timeout 5
console timeout 0
terminal width 80

In article < >,
CFSSMB <> wrote:
:Greetings everyone. I've just recently began learning the PIX config
:as our network guy was fired, so me being a programmer somehow got
:tasked with taking over management of the PIX and setting up a VPN.
:I've looked all over Cisco's site for configuration examples but my
:networking ignorance has me stumped. Basically here is what our
:network consist of: A PIX 515R running version 6.3.3 configured with
:3 interfaces, outside, dmz, inside. I would like this to be as simple
:as possible and I currently have version 4.0.2 of Cisco's VPN client.
:Our people will have access to the Internet through high speed
SL/Cable and then use the VPN to connect to the corp network for
:email and such. Any help is appreciated: PIX Config is as follows:

You didn't actually say what the question is. Looking over your
config, it seems likely the question is "How do I allow the VPN clients
to connect"? If so, then I suggest you load pdm (if it is not
already loaded) and then execute the 'setup' command to configure
a host to allow pdm from, and then use pdm to configure the VPN clients.
--
I wrote a hack in microcode,
with a goto on each line,
it runs as fast as Superman,
but not quite every time! -- Dave Touretzky and Don Libes

(Walter Roberson) wrote in message news:<br9009$api$>...
> In article < >,
> CFSSMB <> wrote:
>
> You didn't actually say what the question is. Looking over your
> config, it seems likely the question is "How do I allow the VPN clients
> to connect"? If so, then I suggest you load pdm (if it is not
> already loaded) and then execute the 'setup' command to configure
> a host to allow pdm from, and then use pdm to configure the VPN clients.

Sorry about not being clear. Yes, I want to allow the 4.0.2 VPN
clients to connect to the 515 Pix. I'm completely new to this stuff
and I really just want to get this done ASAP. I found this on the
previous networking guy's machine. Will this work or do I need to
make changes to it, and if so, what changes. Thanks again for your
help

PIX Version 6.3(3)
interface ethernet0 auto
interface ethernet1 auto
interface ethernet2 auto
nameif ethernet0 outside security0
nameif ethernet1 inside security100
nameif ethernet2 dmz security50
enable password udz4IzQE82ZuVZwG encrypted
passwd udz4IzQE82ZuVZwG encrypted
hostname paculpix
fixup protocol dns maximum-length 512
no fixup protocol ftp 21
no fixup protocol h323 h225 1720
fixup protocol h323 ras 1718-1719
no fixup protocol http 80
no fixup protocol rsh 514
fixup protocol rtsp 554
no fixup protocol sip 5060
fixup protocol sip udp 5060
no fixup protocol skinny 2000
no fixup protocol smtp 25
no fixup protocol sqlnet 1521
fixup protocol tftp 69
names
access-list aclout permit tcp any host *.*.*.53 eq smtp
access-list aclout permit tcp any host *.*.*.53 eq imap4
access-list aclout permit tcp any host *.*.*.53 eq pop3
access-list aclout permit tcp any host *.*.*.53 eq www
access-list aclout permit tcp any host *.*.*.53 eq https
access-list aclout permit tcp any host *.*.*.53 eq domain
access-list aclout permit udp any host *.*.*.53 eq domain
access-list aclout permit tcp any host *.*.*.56 eq https
access-list aclout permit tcp any host *.*.*.56 eq www
access-list aclout permit tcp any host *.*.*.55 eq smtp
access-list aclout permit tcp any host *.*.*.55 eq pop3
access-list aclout permit tcp any host *.*.*.55 eq imap4
access-list aclout permit tcp any host *.*.*.58 eq https
access-list aclout permit tcp any host *.*.*.58 eq www
access-list aclout permit tcp any host *.*.*.54 eq www
access-list aclout permit tcp any host *.*.*.54 eq https
access-list aclout permit tcp any host *.*.*.54 eq 13700
access-list aclout permit tcp any host *.*.*.54 eq 13800
access-list aclout permit tcp any host *.*.*.52 eq www
access-list aclout permit tcp any host *.*.*.52 eq https
access-list aclout permit tcp any host *.*.*.51 eq 13700
access-list aclout permit tcp any host *.*.*.51 eq 13800
access-list aclout permit tcp any host *.*.*.51 eq www
access-list aclout permit tcp any host *.*.*.51 eq https
access-list aclout permit tcp any host *.*.*.58 eq 3389
access-list acldmz permit tcp any host 10.1.1.30 eq 1433
access-list acldmz permit tcp any host 10.1.1.20 eq 1433
access-list acldmz permit tcp any host 10.1.1.22 eq 1433
access-list acldmz permit tcp any host 10.1.1.5 eq https
access-list acldmz permit tcp any host 10.1.1.5 eq www
access-list acldmz permit tcp any host 10.1.1.24 eq smtp
access-list acldmz permit tcp any host 10.1.1.4 eq netbios-ssn
access-list acldmz permit udp any host 10.1.1.4 eq netbios-ns
access-list acldmz permit udp any host 10.1.1.4 eq netbios-dgm
access-list 101 permit ip 192.168.100.0 255.255.255.0 192.168.172.0
255.255.255.
0
pager lines 14
logging on
logging console debugging
logging monitor debugging
logging buffered debugging
mtu outside 1500
mtu inside 1500
mtu dmz 1500
ip address outside *.*.*.50 255.255.255.240
ip address inside 192.168.100.27 255.255.255.0
ip address dmz 10.1.1.1 255.255.255.0
ip audit info action alarm
ip audit attack action alarm
ip local pool vpnpool 192.168.172.1-192.168.172.254
no failover
failover timeout 0:00:00
failover poll 15
no failover ip address outside
no failover ip address inside
no failover ip address dmz
pdm history enable
arp timeout 14400
global (outside) 1 *.*.*.59-*.*.*.60 netmask 255.255.255.240
global (outside) 1 *.*.*.61 netmask 255.255.255.240
global (dmz) 1 10.1.1.100-10.1.1.200 netmask 255.255.255.0
nat (inside) 0 access-list 101
nat (inside) 1 0.0.0.0 0.0.0.0 0 0
nat (dmz) 1 0.0.0.0 0.0.0.0 0 0
static (dmz,outside) *.*.*.58 10.1.1.2 netmask 255.255.255.255 0 0
static (inside,dmz) 10.1.1.20 192.168.100.46 netmask 255.255.255.255 0
0
static (inside,dmz) 10.1.1.22 192.168.100.38 netmask 255.255.255.255 0
0
static (dmz,outside) *.*.*.51 10.1.1.3 netmask 255.255.255.255 0 0
static (inside,dmz) 10.1.1.4 192.168.100.4 netmask 255.255.255.255 0 0
static (inside,dmz) 10.1.1.5 192.168.100.29 netmask 255.255.255.255 0
0
static (inside,dmz) 10.1.1.30 192.168.100.35 netmask 255.255.255.255 0
0
static (dmz,outside) *.*.*.56 10.1.1.7 netmask 255.255.255.255 0 0
static (inside,outside) *.*.*.55 192.168.100.32 netmask
255.255.255.255 0 0
static (dmz,outside) *.*.*.52 10.1.1.8 netmask 255.255.255.255 0 0
static (inside,dmz) 10.1.1.24 192.168.100.24 netmask 255.255.255.255 0
0
static (dmz,outside) *.*.*.54 10.1.1.5 netmask 255.255.255.255 0 0
static (inside,outside) *.*.*.53 192.168.100.31 netmask
255.255.255.255 0 0
access-group aclout in interface outside
access-group acldmz in interface dmz
route outside 0.0.0.0 0.0.0.0 *.*.*.49 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h225
1:00:00
timeout h323 0:05:00 mgcp 0:05:00 sip 0:30:00 sip_media 0:02:00
timeout uauth 0:05:00 absolute
aaa-server TACACS+ protocol tacacs+
aaa-server RADIUS protocol radius
aaa-server LOCAL protocol local
no snmp-server location
no snmp-server contact
snmp-server community front4309
no snmp-server enable traps
floodguard enable
sysopt connection permit-ipsec
sysopt connection permit-pptp
crypto ipsec transform-set vpnset esp-des esp-md5-hmac
crypto dynamic-map dynmap 10 set transform-set vpnset
crypto map vpnmap 10 ipsec-isakmp dynamic dynmap
crypto map vpnmap client configuration address initiate
crypto map vpnmap interface outside
isakmp enable outside
isakmp key ******** address 0.0.0.0 netmask 0.0.0.0
isakmp identity address
isakmp client configuration address-pool local vpnpool outside
isakmp policy 10 authentication pre-share
isakmp policy 10 encryption des
isakmp policy 10 hash md5
isakmp policy 10 group 1
isakmp policy 10 lifetime 1000
isakmp policy 20 authentication pre-share
isakmp policy 20 encryption des
isakmp policy 20 hash md5
isakmp policy 20 group 2
isakmp policy 20 lifetime 86400
vpngroup vpn-all address-pool vpnpool
vpngroup vpn-all wins-server 192.168.100.1
vpngroup vpn-all default-domain password
vpngroup vpn-all idle-time 1800
vpngroup vpn-all password ********
telnet 192.168.100.174 255.255.255.255 inside
telnet 192.168.100.0 255.255.255.0 inside
telnet 192.168.100.0 255.255.255.0 dmz
telnet timeout 15
ssh timeout 5
console timeout 0
vpdn group 1 accept dialin pptp
vpdn group 1 ppp authentication pap
vpdn group 1 ppp authentication chap
vpdn group 1 ppp authentication mschap
vpdn group 1 ppp encryption mppe auto required
vpdn group 1 client configuration address local vpnpool
vpdn group 1 client configuration wins 192.168.100.1
vpdn group 1 pptp echo 60
vpdn group 1 client authentication local
vpdn username ******* password ********
vpdn enable outside
terminal width 80

In article < >,
CFSSMB <> wrote:
:Sorry about not being clear. Yes, I want to allow the 4.0.2 VPN
:clients to connect to the 515 Pix. I'm completely new to this stuff
:and I really just want to get this done ASAP. I found this on the
revious networking guy's machine. Will this work or do I need to
:make changes to it, and if so, what changes.

IX Version 6.3(3)

The Cisco Output Interpreter says that the configuration is
fairly self-consistant. I haven't examined it myself to see whether
it will work.

The Output Interpreter recommends turning on ip verify reverse-path;
recommends hard-coding the interface speeds; changing the xlate
timeout to be no more than 1 hour; configuring a console timeout;
and suggests you might want to turn on access-list compilation
for aclout . Oh, yes, and it recommends logging off-machine
instead of to the console, especially when you are using 'debugging'
level of logging.
--
Cannot open .signature: Permission denied