«

I have a emachines 633ids with a 15gb hard drive and a cognac
motherboard with on board sound. I installed a second hard drive and
it seems to be working ok but now I have no sound. Everything looks
like it should be working, I have no conflicts or error messages.
Could I have knocked loose a jumper or is this a software issue. Any
help would be greatly apprecieated. You can e-mail me at

On 19 Nov 2003 14:14:46 -0800, (steve) wrote:

>I have a emachines 633ids with a 15gb hard drive and a cognac
>motherboard with on board sound. I installed a second hard drive and
>it seems to be working ok but now I have no sound. Everything looks
>like it should be working, I have no conflicts or error messages.
>Could I have knocked loose a jumper or is this a software issue. Any
>help would be greatly apprecieated. You can e-mail me at

A. Check the bios setup to see if the onboard audio has been disabled.

B. Reinstall drivers for sound applications from your recovery CD's.

steve wrote:
> I have a emachines 633ids with a 15gb hard drive and a cognac
> motherboard with on board sound. I installed a second hard drive and
> it seems to be working ok but now I have no sound. Everything looks
> like it should be working, I have no conflicts or error messages.
> Could I have knocked loose a jumper or is this a software issue. Any
> help would be greatly apprecieated. You can e-mail me at

No sound period, or when you play cd's or what? Check your volume
settings.

--
Night_Seer

Check that there are no wires or connectors that have come off.

Check that the volume controls in sound set-up is turned up.

Check that the sound is not muted.

Check that the BIOS set-up is correct, and the proper drivers are installed.

--

Greetings,

Jerry Greenberg GLG Technologies GLG
=========================================
WebPage http://www.zoom-one.com
Electronics http://www.zoom-one.com/electron.htm
=========================================


"steve" <> wrote in message
news: m...
I have a emachines 633ids with a 15gb hard drive and a cognac
motherboard with on board sound. I installed a second hard drive and
it seems to be working ok but now I have no sound. Everything looks
like it should be working, I have no conflicts or error messages.
Could I have knocked loose a jumper or is this a software issue. Any
help would be greatly apprecieated. You can e-mail me at