asterisk and CID

Hi guys (and girls?),

I had a working config few days ago, but I messed up with my zaptel/zapata
configs and can't get CID working.
I've connected regular phone and it is showing CID so the line is okay.
My log is telling me:

Jun 22 10:47:39 VERBOSE[5924] logger.c: == Starting post polarity CID
detection on channel 2
Jun 22 10:47:39 VERBOSE[10181] logger.c: -- Starting simple switch on
'Zap/2-1'
Jun 22 10:47:41 DEBUG[10181] chan_zap.c: Exception on 22, channel 2
Jun 22 10:47:41 DEBUG[10181] chan_zap.c: Got event Ring Begin(1 on channel
2 (index 0)
Jun 22 10:47:42 DEBUG[10181] chan_zap.c: Exception on 22, channel 2
Jun 22 10:47:42 DEBUG[10181] chan_zap.c: Got event Ring/Answered(2) on
channel 2 (index 0)
Jun 22 10:47:42 DEBUG[10181] chan_zap.c: Setting IDLE polarity due to ring.
Old polarity was 1
Jun 22 10:47:42 WARNING[10181] chan_zap.c: Ring/Off-hook in strange state 6
on channel 2
Jun 22 10:47:43 WARNING[10181] chan_zap.c: CID timed out waiting for ring.
Exiting simple switch
Jun 22 10:47:43 DEBUG[10181] chan_zap.c: Hangup: channel: 2 index = 0,
normal = 22, callwait = -1, thirdcall = -1
Jun 22 10:47:43 DEBUG[10181] chan_zap.c: disabled echo cancellation on
channel 2
Jun 22 10:47:43 DEBUG[10181] chan_zap.c: Set option TDD MODE, value: OFF(0)
on Zap/2-1
Jun 22 10:47:43 DEBUG[10181] chan_zap.c: Updated conferencing on 2, with 0
conference users
Jun 22 10:47:43 VERBOSE[10181] logger.c: -- Hungup 'Zap/2-1'
Jun 22 10:47:45 VERBOSE[10185] logger.c: -- Starting simple switch on
'Zap/2-1'
Jun 22 10:47:45 VERBOSE[10185] logger.c: -- Executing Answer("Zap/2-1",
"") in new stack
Jun 22 10:47:45 DEBUG[10185] chan_zap.c: Took Zap/2-1 off hook
Jun 22 10:47:45 DEBUG[10185] chan_zap.c: Enabled echo cancellation on
channel 2
Jun 22 10:47:45 DEBUG[10185] chan_zap.c: Engaged echo training on channel 2
Jun 22 10:47:45 VERBOSE[10185] logger.c: -- Executing Wait("Zap/2-1",
"1") in new stack


Weird thing is that it is ringing, answering and immediately disconnecting.
And ringing again and connecting.
It wasn't like that before, but I can't figure out what is the problem.

Does any of you have WORKING zapata.conf, zapata-auto.conf and zaptel.conf
configs and could send them to me?
I'd be more than grateful.

Thanks,
Martin

Martin Lukasik