SPA3000 Voipbuster on Gateway1

I've just got my Sipura SPA3000 so getting to grips with as as fast as
I can. I've got Sipgate setup on line 1 which seems to be working fine
for calls in and out. I'm not trying to configure Voipbuster as
gateway 1. My current settings are :

Line 1 tab settings
Gateway 1 : <username>@sip.voipbuster.com
GW1 NAT Mapping Enable: Yes
GW1 Auth ID: <username>
GW1 Password: <password>

Settings seem ok as work on PAP2, switched back to PAP2 and Voipbuster
is working today

The dial plan is set to :

(xx.|*xx.|<#1,:>xx.<:gw1>)

I pick up handset, press #1 and get a constant tone (like
unavailable). Dial a number and dials then beeping. So I've not got
something right yet. Still trying a few settings and googling but any
help would be much appriciated. tia

oh all ports are open as SPA3000 in DMZ.

Bleh

Bleh wrote:

> The dial plan is set to :
>
> (xx.|*xx.|<#1,:>xx.<:gw1>)
>

should be <:@gw1> ?

Phil

"PhilT" <> wrote in message
news: ps.com...
>
> Bleh wrote:
>
>> The dial plan is set to :
>>
>> (xx.|*xx.|<#1,:>xx.<:gw1>)
>>
>
> should be <:@gw1> ?
>
> Phil
>

I'm trying to get internetcalls.com to function on a gateway & have been
trying: <0#,:>xx.<:@gw1> to no avail.

On 20 Jun 2006 01:32:32 -0700, "PhilT" <> wrote:

>
>Bleh wrote:
>
>> The dial plan is set to :
>>
>> (xx.|*xx.|<#1,:>xx.<:gw1>)
>>
>
>should be <:@gw1> ?
>
>Phil


I can't believe I missed that...yes it not works. Thanks