Velocity Reviews - Computer Hardware Reviews

Velocity Reviews > Newsgroups > Computing > Cisco > Re: ISDN BRI dial-up access!

Reply
Thread Tools

Re: ISDN BRI dial-up access!

 
 
thrill5
Guest
Posts: n/a
 
      07-20-2006
Your call is call is coming as a voice call, and the router does not know
what to do it, so it throws out a busy. ISDN is not like analog where you
call the number from your desk and see if you can hear modem tones. ISDN
data calls, come in as DATA.

Scott

"NeoN" <(E-Mail Removed)> wrote in message
news:(E-Mail Removed) oups.com...
> Good day!
> I have a problem. i`ll try to do a phone call but the line is busy!
>
> Log
>
> *Mar 1 10:43:09.692: ISDN BR0/0 EVENT:
> service_queue_from_physical_layer: Recvd L1 prim 1 state is 3
> *Mar 1 10:43:09.692: ISDN BR0/0 EVENT: isdn_sw_cstate: State = 4, Old
> State = 4
> *Mar 1 10:43:09.692: ISDN BR0/0 EVENT:
> service_queue_from_physical_layer: Recvd L1 prim 6 state is 1
> *Mar 1 10:43:09.692: ISDN BR0/0 EVENTd:
> service_queue_from_physical_layer: Recvd MPH_EI2_IND from L1
> *Mar 1 10:43:09.696: ISDN BR0/0 BACKHAUL: L3IF_rx_L2_pak: received
> data 0x0001
> *Mar 1 10:43:09.700: ISDN BR0/0 SERROR: L2_Go: at bailout DLCB is NULL
>
> L2: sapi 63 tei 127 ces 0 ev 0x650
> *Mar 1 10:43:09.732: ISDN BR0/0 BACKHAUL: L3IF_rx_L2_pak: received
> data 0x0F00560283
> *Mar 1 10:43:09.736: ISDN BR0/0 SERROR: L2_Go: at bailout DLCB is NULL
>
> L2: sapi 63 tei 127 ces 0 ev 0x3
> *Mar 1 10:43:09.760: %ISDN-6-LAYER2UP: Layer 2 for Interface BR0/0,
> TEI 65 changed to up
> *Mar 1 10:43:09.828: ISDN BR0/0 Q931: RX <- SETUP pd = 8 callref =
> 0x0F
> Sending Complete
> Bearer Capability i = 0x8090A3
> Standard = CCITT
> Transer Capability = Speech
> Transfer Mode = Circuit
> Transfer Rate = 64 kbit/s
> Channel ID i = 0x8A
> Progress Ind i = 0x8281 - Call not end-to-end ISDN, may have in-band
> info
> Called Party Number i = 0x81, '72491'
> Plan:ISDN, Type:Unknown
> *Mar 1 10:43:09.828: ISDN BR0/0 BACKHAUL: L3IF_rx_L2_pak: received
> data 0x08010F05A104038090A318018A1E0282
> *Mar 1 10:43:09.828: 817006813732343931
> *Mar 1 10:43:09.828: ISDN BR0/0 SERROR: L2_Go: at bailout DLCB is NULL
>
> L2: sapi 0 tei 127 ces 0 ev 0x3
> *Mar 1 10:43:09.832: ISDN BR0/0 EVENT: process_rxstate: ces/callid
> 1/0x2 calltype 2 HOST_INCOMING_CALL
> *Mar 1 10:43:09.832: ISDN BR0/0 EVENTd: isdn_get_guid: Got Guid BR0/0
> *Mar 1 10:43:09.832: ISDN BR0/0 EVENT: host_incoming_call: call_id
> 0x0002, Guid = BR0/0
> *Mar 1 10:43:09.836: ISDN BR0/0 EVENTd: calltrkr_incoming_call:
> call_id=0x2
> *Mar 1 10:43:09.836: ISDN BR0/0 EVENTd: calltrkr_setup_received:
> isdn_info=2195596752l, call_id=0x2 ANSWER
> *Mar 1 10:43:09.836: ISDN BR0/0 EVENTd: calltrkr_setup_received:
> calltracker disabled
> *Mar 1 10:43:09.836: ISDN BR0/0 EVENTd: host_incoming_call: (non-POTS)
> VOICE call
> *Mar 1 10:43:09.836: ISDN BR0/0 EVENTd: calltrkr_setup_received:
> isdn_info=2195622208l, call_id=0x2 ANSWER
> *Mar 1 10:43:09.840: ISDN BR0/0 EVENTd: host_incoming_call: (1)
> call_type is VOICE
> *Mar 1 10:43:09.840: ISDN BR0/0 EVENTd: host_incoming_call:
> voice_answer_data = FALSE call type is VOICE ALAW
> *Mar 1 10:43:09.840: ISDN BR0/0 EVENTd: host_incoming_call: Received a
> VOICE call from <unknown> on B2 at 64 Kb/s
> *Mar 1 10:43:09.840: ISDN BR0/0 EVENTd: host_incoming_call: Accepting
> call call id 0x2
> *Mar 1 10:43:09.840: ISDN BR0/0 EVENTd: isdn_fromdialer: RM returned
> call_type 1 resource type 0 response 2
> *Mar 1 10:43:09.844: ISDN BR0/0 EVENT: UserIdle: callid 0x2 received
> ACCEPT_CALL (0x13)
> *Mar 1 10:43:09.844: ISDN BR0/0 **ERROR**: accept_incoming_csm_call:
> modem problem Bearer capability not available(0x3A): b channel 1, call
> id 0x2
> *Mar 1 10:43:09.844: ISDN BR0/0 EVENTd: process_disconnect: call id
> 0x2, call type is VOICE, b_idb 0x82DE6F74, ces 1, cause Bearer
> capability not available(0x3A)
> *Mar 1 10:43:09.848: ISDN BR0/0 EVENTd: calltrkr_call_disconnected:
> isdn_info=0x82DE8940, call_id=0x2
> *Mar 1 10:43:09.848: ISDN BR0/0 EVENTd: process_disconnect: Raw
> Release Message 0x0500010002040802FFBA080280BA
> *Mar 1 10:43:09.852: ISDN BR0/0 Q931: TX -> CALL_PROC pd = 8 callref
> = 0x8F
> Channel ID i = 0x8A
> *Mar 1 10:43:09.876: ISDN BR0/0 Q931: TX -> DISCONNECT pd = 8 callref
> = 0x8F
> Cause i = 0x80BA - Bearer capability not available
> *Mar 1 10:43:09.913: ISDN BR0/0 Q931: RX <- STATUS pd = 8 callref =
> 0x0F
> Cause i = 0x8290 - Normal call clearing
> Call State i = 0x06
> *Mar 1 10:43:09.913: ISDN BR0/0 BACKHAUL: L3IF_rx_L2_pak: received
> data 0x08010F7D08028290140106
> *Mar 1 10:43:09.917: ISDN BR0/0 Q931: TX -> RELEASE pd = 8 callref =
> 0x8F
> Cause i = 0x80E5 - Message not compatible with call state
> *Mar 1 10:43:09.953: ISDN BR0/0 Q931: RX <- RELEASE_COMP pd = 8
> callref = 0x0F
> Cause i = 0x8290 - Normal call clearing
> *Mar 1 10:43:09.953: ISDN BR0/0 BACKHAUL: L3IF_rx_L2_pak: received
> data 0x08010F5A08028290
> *Mar 1 10:43:09.957: ISDN EVENTd: cc_clear_free_list freed 0x81AD40F8
>
> *Mar 1 10:43:09.957: ISDN BR0/0 EVENT: process_rxstate: ces/callid
> 1/0x2 calltype 2 HOST_DISCONNECT_ACK
> *Mar 1 10:43:09.957: ISDN BR0/0 EVENTd: process_rxstate: cause=0x10
> (16), cause_present=1
> *Mar 1 10:43:09.957: ISDN BR0/0 EVENTd: calltrkr_call_cleared:
> isdn_info=0x82DE25D0, call_id=0x2
> *Mar 1 10:43:09.961: ISDN BR0/0 EVENTd: calltrkr_call_cleared:
> isdn_info=0x82DE8940, call_id=0x2
> *Mar 1 10:43:09.961: ISDN BR0/0 EVENTd: host_disconnect_ack: call type
> is VOICE
>
>
> Config
> interface BRI0/0
> description TO_02
> no ip address
> service-policy output VOICE-POLICY
> encapsulation ppp
> no ip mroute-cache
> dialer rotary-group 1
> dialer-group 1
> isdn switch-type basic-net3
> no cdp enable
> !
> interface Dialer1
> description connected 02
> ip address 10.23.255.90 255.255.255.252
> service-policy output VOICE-POLICY
> encapsulation ppp
> no ip route-cache cef
> no ip split-horizon
> dialer in-band
> dialer hold-queue 10
> dialer-group 1
> no cdp enable
> ppp authentication chap
> ppp multilink
> ppp multilink fragment delay 10
> ppp multilink interleave
>



 
Reply With Quote
 
 
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
pc with isdn modem not connecte isdn 1841 router with isdn module sync Cisco 0 06-05-2007 10:10 AM
Re: ISDN BRI unwanted deconnections on a CIsco 2621XM Stephan Cohen Cisco 0 10-16-2003 03:33 PM
Re: ISDN BRI unwanted deconnections on a CIsco 2621XM Aaron Leonard Cisco 3 10-16-2003 05:22 AM
ISDN (BRI) Dial-in w/cisco 2611, routing Rainer Cisco 4 07-21-2003 08:10 AM
Help with ISDN PRI & BRI Wayne Cisco 3 07-12-2003 01:56 PM



Advertisments