«

Hi There,

We are shortly getting an ADSL line assigned to our test network. We have a
setup like this...

Cisco 837 > PIX > 2600 >2600 >SUBNET1
>2600 >SUBNET2
>2600 >SUBNET3

I would like to be able to place my public IP's under the subnets leaving
the core devices with the internal addresses.

I know we obviosuly need to assign one IP to our gateway, how would other
public traffic be routed through, I have read various configs but can see
nothing regarding routing the public traffic to the subnets.

Thanks

AJ