Velocity Reviews - Computer Hardware Reviews

Velocity Reviews > Newsgroups > Computing > Cisco > Creating a simple rule using PDM 3.0(1)

Reply
Thread Tools

Creating a simple rule using PDM 3.0(1)

 
 
Corbin O'Reilly
Guest
Posts: n/a
 
      11-14-2003
Hi everyone. I would like to prevent a specific external IP address from
accessing anything on my Internal LAN. I have just recently loaded PDM
3.0(1) onto my PIX 515 running 6.3(1) and am getting used to it. Let's
assume the external IP address that I want to block is 61.132.89.106. When I
create a new rule, it wants me to fill in certain information under the
ACTION, SOURCE HOST/NETWORK, DESTINATION HOST/NETWORK, and PROTCOL AND
SERVICE boxes. Please tell me if what I am choosing is correct.

ACTION = deny
SOURCE HOST/NETWORK = outside, 61.132.89.106, 255.255.255.255
DESTINATION HOST/NETWORK = inside, 0.0.0.0, 0.0.0.0
PROTOCOL AND SERVICE = IP

If I choose these settings and click OK a box comes up and says, "PDM cannot
find 61.132.189.106 255.255.255.255 on interface outside. Would you like to
add this host or network now?" Do I want to go ahead and do this?

Thanks for the help.





 
Reply With Quote
 
 
 
 
Corbin O'Reilly
Guest
Posts: n/a
 
      11-20-2003
Hi. I successfully created this rule but I have one more question. When I do
a Show Config in the CLI, the line "pdm location Hacker1 255.255.255.255
outside" now shows up in the config. Hacker1 is a reference to the external
IP address 61.132.89.106 that I am now blocking. Should I remove this line?
Thanks.

"Corbin O'Reilly" <(E-Mail Removed)> wrote in message
news:5A5tb.174$(E-Mail Removed) k.net...
> Hi everyone. I would like to prevent a specific external IP address from
> accessing anything on my Internal LAN. I have just recently loaded PDM
> 3.0(1) onto my PIX 515 running 6.3(1) and am getting used to it. Let's
> assume the external IP address that I want to block is 61.132.89.106. When

I
> create a new rule, it wants me to fill in certain information under the
> ACTION, SOURCE HOST/NETWORK, DESTINATION HOST/NETWORK, and PROTCOL AND
> SERVICE boxes. Please tell me if what I am choosing is correct.
>
> ACTION = deny
> SOURCE HOST/NETWORK = outside, 61.132.89.106, 255.255.255.255
> DESTINATION HOST/NETWORK = inside, 0.0.0.0, 0.0.0.0
> PROTOCOL AND SERVICE = IP
>
> If I choose these settings and click OK a box comes up and says, "PDM

cannot
> find 61.132.189.106 255.255.255.255 on interface outside. Would you like

to
> add this host or network now?" Do I want to go ahead and do this?
>
> Thanks for the help.
>
>
>
>
>



 
Reply With Quote
 
 
 
 
Walter Roberson
Guest
Posts: n/a
 
      11-20-2003
In article <JoVub.6457$(E-Mail Removed). net>,
Corbin O'Reilly <(E-Mail Removed)> wrote:
:Hi. I successfully created this rule but I have one more question. When I do
:a Show Config in the CLI, the line "pdm location Hacker1 255.255.255.255
utside" now shows up in the config. Hacker1 is a reference to the external
:IP address 61.132.89.106 that I am now blocking. Should I remove this line?

You could, but PDM will just recreate the line the next time it
reads the config.

It isn't an operative line -- it just gives pdm information that pdm
uses to present data to the user.

--
"Meme" is self-referential; memes exist if and only if the "meme" meme
exists. "Meme" is thus logically a meta-meme; but until the existance
of meta-memes is more widely recognized, "meta-meme" is not a meme.
-- A Child's Garden Of Memes
 
Reply With Quote
 
 
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
setting up address translation rule in PDM cisco Cisco 2 07-10-2007 11:54 AM
how to add validation rule for url in the validation-rule.xml ,I added some thing like this but......... shailajabtech@gmail.com Java 0 10-12-2006 08:36 AM
Rob Pike's simple Include rule Neil Cerutti C Programming 40 05-01-2004 05:11 AM
PIX Firewall - PDM Null Rule ? Martin Bilgrav Cisco 0 02-20-2004 01:38 PM
simple PIX 515 access rule question Hana Cisco 1 12-11-2003 03:41 PM



Advertisments