Velocity Reviews - Computer Hardware Reviews

Velocity Reviews > Newsgroups > Computing > Cisco > FastEthernet Output Errors

Reply
Thread Tools

FastEthernet Output Errors

 
 
Raymond Chow
Guest
Posts: n/a
 
      11-08-2003
Hi All,

Can anyone help me on this issue. I got a lot of "output errors" in my
fastethernet interface. what is the meaning of output errors? and why
it even more than collision?

FastEthernet0 is up, line protocol is up
Hardware is DEC21140, address is 0060.5c5d.640a (bia 0060.5c5d.640a)
Internet address is 1.1.x.x/16
MTU 1500 bytes, BW 100000 Kbit, DLY 100 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation ARPA, loopback not set, keepalive set (10 sec)
Half-duplex, 100Mb/s, 100BaseTX/FX
ARP type: ARPA, ARP Timeout 04:00:00
Last input 00:00:00, output 00:00:00, output hang never
Last clearing of "show interface" counters never
Queueing strategy: fifo
Output queue 0/40, 0 drops; input queue 1/75, 0 drops
5 minute input rate 369000 bits/sec, 83 packets/sec
5 minute output rate 56000 bits/sec, 51 packets/sec
3713062 packets input, 1646856803 bytes, 0 no buffer
Received 888550 broadcasts, 0 runts, 0 giants, 0 throttles
13 input errors, 13 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
0 watchdog, 0 multicast
8 input packets with dribble condition detected
2927595 packets output, 903835356 bytes, 0 underruns
6240 output errors, 4494 collisions, 4 interface resets
0 babbles, 0 late collision, 0 deferred
8 lost carrier, 0 no carrier
0 output buffer failures, 0 output buffers swapped out


Thanks

Raymond
 
Reply With Quote
 
 
 
 
dmcknigh
Guest
Posts: n/a
 
      11-08-2003
Raymond - Make sure that the other end of the FE connection isn't set
for Full Duplex. If the (half duplex) FE interf. on your router starts
receiving a frame while it's transmitting, I wonder if it may log it
as an output error. Just a thought.

dmcknigh

http://www.velocityreviews.com/forums/(E-Mail Removed) (Raymond Chow) wrote in message news:<(E-Mail Removed). com>...
> Hi All,
>
> Can anyone help me on this issue. I got a lot of "output errors" in my
> fastethernet interface. what is the meaning of output errors? and why
> it even more than collision?
>
> FastEthernet0 is up, line protocol is up
> Hardware is DEC21140, address is 0060.5c5d.640a (bia 0060.5c5d.640a)
> Internet address is 1.1.x.x/16
> MTU 1500 bytes, BW 100000 Kbit, DLY 100 usec,
> reliability 255/255, txload 1/255, rxload 1/255
> Encapsulation ARPA, loopback not set, keepalive set (10 sec)
> Half-duplex, 100Mb/s, 100BaseTX/FX
> ARP type: ARPA, ARP Timeout 04:00:00
> Last input 00:00:00, output 00:00:00, output hang never
> Last clearing of "show interface" counters never
> Queueing strategy: fifo
> Output queue 0/40, 0 drops; input queue 1/75, 0 drops
> 5 minute input rate 369000 bits/sec, 83 packets/sec
> 5 minute output rate 56000 bits/sec, 51 packets/sec
> 3713062 packets input, 1646856803 bytes, 0 no buffer
> Received 888550 broadcasts, 0 runts, 0 giants, 0 throttles
> 13 input errors, 13 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
> 0 watchdog, 0 multicast
> 8 input packets with dribble condition detected
> 2927595 packets output, 903835356 bytes, 0 underruns
> 6240 output errors, 4494 collisions, 4 interface resets
> 0 babbles, 0 late collision, 0 deferred
> 8 lost carrier, 0 no carrier
> 0 output buffer failures, 0 output buffers swapped out
>
>
> Thanks
>
> Raymond

 
Reply With Quote
 
 
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Re: Cisco 1721 (all feature set) with WIC-4ESW 4 FastEthernet Switch Erez Tourjeman Cisco 1 04-26-2004 07:11 PM
Port-security on 16-port FastEthernet module (NM-ESW-16) Dmitry Cisco 0 04-01-2004 06:38 PM
Cisco 1760 and fastethernet speed Mirek Cisco 3 02-23-2004 08:43 AM
Errors, errors, errors Mark Goldin ASP .Net 2 01-17-2004 08:05 PM
Cisco 2600, FastEthernet won't come up Craig Bruenderman Cisco 1 11-07-2003 03:21 PM



Advertisments