Velocity Reviews - Computer Hardware Reviews

Velocity Reviews > Newsgroups > Computing > Cisco > H.323-ID used by Cisco CallManager

Reply
Thread Tools

H.323-ID used by Cisco CallManager

 
 
ango
Guest
Posts: n/a
 
      06-19-2006
Hello,

I'm using Cisco CallManager v 4.1, and I have noted a strange behaviour

in the H.323-ID used.
I have an H.225 Trunk (Gatekepeer Controlled). Under this menu I give a

name to the "Device Name" Field. For example, I call this field "CCM".
In the AGK table, the H.323-ID associated to CCM (visbile with show
gatekeeper endpoint) is slightly different: for example, "CCM_3".
What value does the CCM use to register in the RRQ ? Is there a
connection with CTI ID?

Second question: when I have a calling from the CCM, normally in the
Setup message the source H.323 is equal to the E.164 number of the
calling device.

I also need to exactly understand how CCM creates the H323-ID put in

outgoing SETUP messages. I would like the ongoing Setup to have the
same H323-ID used in the RRQ. Does anyone know how to manage it ?

Thank you
Alessandro

 
Reply With Quote
 
 
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
H.323-ID used by Cisco CallManager ango VOIP 0 06-16-2006 03:01 PM
Cisco CallManager 4.01sr2 and JTAPI getStatus() Jannar Molden Cisco 1 05-25-2004 11:59 AM
Cisco CallManager and integration with other webapplications. Karol Cisco 0 05-13-2004 01:55 PM
New Cisco CallManager Express (CME) Resource Site Pat Jensen Cisco 1 02-29-2004 01:38 PM
Cisco CallManager and DHCP Option 066 vs. 150 Gerold Hornig Cisco 1 01-23-2004 11:28 PM



Advertisments