Velocity Reviews - Computer Hardware Reviews

Velocity Reviews > Newsgroups > Computing > Cisco > Catalyst 6509 VLAN and SNMP question

Reply
Thread Tools

Catalyst 6509 VLAN and SNMP question

 
 
Martin Haberstroh
Guest
Posts: n/a
 
      11-04-2003
Hi everybody,

running a Cisco Catalyst 6509 Switch with WS-X6K-SUP1A-2GE and CatOS 5.5.5 I
monitor my interfaces with mrtg.
That is running fine. Now I also want to monitor traffic for each VLAN. But
a snmp walk through ifOutUCastPkts shows me 0 for the VLANs (for the
interfaces the values looking ok).
There are a few more switches (Catalyst 3548XL) connected to this one with
dot1q-trunks and vtp is configured.

Is it possible to get traffic values from VLANs?
If yes, what do I have to configure at the switch so traffic will be
counted?

Martin


 
Reply With Quote
 
 
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
anyone know about: vlan trunking with catalyst 1900 to any other iosdevice (catalyst 2950) Neddy Cisco 8 05-27-2009 04:37 PM
SNMP OID's for Cisco 6509 with SUP2 and MSFC sillz Cisco 0 12-12-2007 07:39 PM
VLAN trunking across Catalyst 2900 XL and Catalyst 1900. Jarek Jarzebowski Cisco 1 06-18-2005 08:57 PM
Re: 6509 sup720 vlan question Glen Grant Cisco 0 11-14-2004 03:06 AM
6509 with sup.720 routing vlan question NNTP Cisco 1 07-28-2004 07:13 PM



Advertisments