Velocity Reviews - Computer Hardware Reviews

Velocity Reviews > Newsgroups > Computing > Cisco > 4006 port with LED out

Reply
Thread Tools

4006 port with LED out

 
 
Kevin
Guest
Posts: n/a
 
      11-01-2003
I have a 4006, with two ports that have no color lit on the LED (no
green, no orange). I perform a 'shut', no change. 'no shut', no change.
So, I'm trying to figure out 1. what's wrong, and 2. if there's a way I
can basically reset that port.

I've found the clear interface command, which says it "resets the
hardware logic". Given that that's not exactly a detailed description,
I'm hesitant to do it.

Any ideas?

Thanks,

Kevin
 
Reply With Quote
 
 
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
SPAN port on Cat 4006 Chad Mahoney Cisco 3 04-04-2008 01:42 PM
Determining an IP address' port on a Catalyst 4006? Chris Cisco 6 01-17-2007 10:52 AM
4006 PSU pin out Colin Cisco 2 02-02-2006 08:13 AM
full gigabit on each port 4006 vs 6506 Henry Hollenberg Cisco 2 02-14-2004 01:07 PM
LED there be Light, a D.I.Y. LED ringlight E Pericoloso Sporgersi Digital Photography 18 08-19-2003 03:22 PM



Advertisments
 



1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57