Velocity Reviews - Computer Hardware Reviews

Velocity Reviews > Newsgroups > Computing > Cisco > No Traffic passed over 3620 as PPPoE Terminator

Reply
Thread Tools

No Traffic passed over 3620 as PPPoE Terminator

 
 
YDKCooKiE
Guest
Posts: n/a
 
      10-31-2003

Hello,

We're an ISP that is partnering with SBC to provide DSL for our own
end users. We've got everything setup to the point that our 3620 will
accept a PPPoE request over an L2TP tunnel and forward it on to our
RADIUS server, the RADIUS server will authenticate the user and pass
that back to the 3620 which will then hand off an IP address over the
L2TP tunnel to the DSL user. As soon as that happens, any attempt to
pass traffic on that DSL circuit fails, no pings, traceroutes, HTTP,
nothing. We're looking for any ideas as to why this might happen.
Enclosed is our config.

Thanks,
Curt LeCaptain,
Systems Administrator,
Infinity Technology, Inc.


Config:

Current configuration : 19021 bytes
!
version 12.1
no service single-slot-reload-enable
service timestamps debug uptime
service timestamps log uptime
service password-encryption
!
hostname gb-dsl
!
logging rate-limit console 10 except errors
aaa new-model
aaa authentication login default line
aaa authentication ppp DSL group radius none
aaa authentication ppp DSL2 group radius none
aaa authorization network default group radius
aaa accounting delay-start
aaa accounting network default start-stop group radius
enable secret 5 *snip*
enable password 7 *snip*
!
clock timezone CST -6
clock summer-time CDT recurring
ip subnet-zero
!
!
no ip finger
ip domain-name itol.com
ip name-server 209.62.160.13
ip name-server 209.62.160.14
!
vpdn enable
no vpdn logging local
no vpdn logging remote
no vpdn logging user
!
vpdn-group DSL
accept-dialin
protocol l2tp
virtual-template 1
terminate-from hostname *snip*
local name infinity
lcp renegotiation always
l2tp tunnel password 7 *snip*
!
vpdn-group DSL2
accept-dialin
protocol l2tp
virtual-template 2
terminate-from hostname *snip*
local name infinity
lcp renegotiation always
l2tp tunnel password 7 *snip*
!
!
!
call rsvp-sync
!
!
!
!
!
!
!
!
!
interface Loopback4
description SBC DSL
ip address 209.62.171.1 255.255.255.0
!
interface Ethernet0/0
ip address 209.62.160.3 255.255.255.192
ip access-group 130 in
ip access-group 130 out
ip route-cache policy
ip ospf authentication
ip ospf authentication-key 7 *snip*
half-duplex
pppoe enable
no cdp enable
!
!
interface ATM1/1
description SBC DSL
no ip address
no ip route-cache
no ip mroute-cache
atm vc-per-vp 256
no atm ilmi-keepalive
scrambling-payload
!
interface ATM1/1.2 multipoint
ip address 10.169.101.5 255.255.255.252
no ip route-cache
no ip mroute-cache
pvc 3/101
encapsulation aal5snap
!
!
interface ATM1/1.3 multipoint
ip address 10.169.102.5 255.255.255.252
no ip route-cache
no ip mroute-cache
pvc 3/102
encapsulation aal5snap
!
!
!
interface ATM1/3
description SBC DSL
no ip address
no ip route-cache
no ip mroute-cache
shutdown
atm vc-per-vp 256
no atm ilmi-keepalive
scrambling-payload
arp arpa
arp timeout 0
!
!
interface Virtual-Template1
mtu 1492
ip unnumbered Loopback4
peer default ip address pool DSL
ppp authentication pap callin DSL
!
interface Virtual-Template2
mtu 1492
ip unnumbered Loopback4
peer default ip address pool DSL
ppp authentication pap callin DSL2
!
ip local pool DSL 209.62.171.10 209.62.171.254
ip classless
ip route 0.0.0.0 0.0.0.0 209.62.160.1
no ip http server
!
access-list 87 permit 209.62.160.0 0.0.0.63
access-list 87 permit 209.62.160.64 0.0.0.63
access-list 130 deny tcp any any eq 4444
access-list 130 deny udp any any eq tftp
access-list 130 deny tcp any any eq 707
access-list 130 deny tcp any any eq 135
access-list 130 deny tcp any any eq 137
access-list 130 deny tcp any any eq 138
access-list 130 deny tcp any any eq 139
access-list 130 deny tcp any any eq 193
access-list 130 deny tcp any any eq 445
access-list 130 deny tcp any any eq 593
access-list 130 deny tcp any any range 666 765
access-list 130 permit icmp host 209.62.160.7 any
access-list 130 permit icmp any host 209.62.160.7
access-list 130 deny icmp any any
access-list 130 permit ip any any
no cdp run
radius-server host 209.62.160.18 auth-port xxxx acct-port xxxx
radius-server retransmit 3
radius-server attribute 8 include-in-access-req
radius-server key 7 *SNIP*
radius-server authorization permit missing Service-Type
!
!
dial-peer cor custom
!
 
Reply With Quote
 
 
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Cisco 3640 128D/16F PPPOE problem (cannot create pppoe protocol) lga775 Hardware 1 02-18-2010 10:16 AM
VOIP over VPN over TCP over WAP over 3G Theo Markettos UK VOIP 2 02-14-2008 03:27 PM
Problem with TCP traffic over ATM/PPPoE link KR Cisco 1 03-21-2007 06:56 PM
Cisco pppoe client can connect multiple pppoe sessions John Nordien Cisco 0 11-22-2004 09:11 PM
Cisco 4700/2600 running as PPPoE Terminator Francisco Rivas Cisco 1 07-22-2003 02:54 PM



Advertisments