Velocity Reviews - Computer Hardware Reviews

Velocity Reviews > Newsgroups > Computing > Cisco > CISCO 2612 - routing problems when using access point

Thread Tools

CISCO 2612 - routing problems when using access point

Markie2612 Markie2612 is offline
Junior Member
Join Date: Jul 2006
Posts: 1
I have a cisco 2612 IOS 12.2(15)T17 and a cisco switch 3548.
The router i use as a "router on a stick" and the port trunked, (because there is only one ethernet port) and there are 5 vlans.

There are 5 subinterfaces configured, and i use dot1q encapsulation.

I configured the router and the switch so i can rout between all the vlans (this works fine). When i connect an access point (i tested with a cisco 1200 and a symbol 4131), the laptop that connects on the wireless, receives an DHCP adres, from the same range of it's own VLAN, bud can not connect to another VLAN.

When the laptop is conncted directly to the port there is no problem.

Someone told me i had to use the command native, and not on the sub interface bud on the eth 0/0 interface.
Bud this is something i can't configure.

Is there someone who can help me here?


Reply With Quote

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
Share-Point-2010 ,Share-Point -2010 Training , Share-point-2010Hyderabad , Share-point-2010 Institute Saraswati lakki ASP .Net 0 01-06-2012 06:39 AM
Scenario 5: IS-IS routing on Frame Relay Multi-point and Point-to-Point David Sudjiman Cisco 0 06-08-2006 09:11 AM
Cisco 2612 w/ (1) WIC-1T Cisco 1 01-05-2005 07:14 PM
Cisco VPN Client 4.01 (Rel) problems connecting to Cisc o 2612 IOS Router. Mark Cisco 2 03-02-2004 02:17 PM
Cisco 2612 IOS image Glaug Cisco 0 02-13-2004 11:12 PM