Velocity Reviews - Computer Hardware Reviews

Velocity Reviews > Newsgroups > Computing > Cisco > Using RADIUS for authentication on WS-C3524-XL (C3500XL-C3H2S-M), Version 12.0(5.2)XU

Reply
Thread Tools

Using RADIUS for authentication on WS-C3524-XL (C3500XL-C3H2S-M), Version 12.0(5.2)XU

 
 
Matthew
Guest
Posts: n/a
 
      10-25-2003
Hi,

I am trying to configure radius authentication on some Cisco devices.

Following the instructions, i am able to configure the AAA command
components, but when try and configure the "radius-server" components the
command is not recognised.

Is authentication via a radius server supported on the following platform:

Thanks for your help
Matthew ((E-Mail Removed))


Cisco Internetwork Operating System Software
IOS (tm) C3500XL Software (C3500XL-C3H2S-M), Version 12.0(5.2)XU,
MAINTENANCE IN
TERIM SOFTWARE
Copyright (c) 1986-2000 by cisco Systems, Inc.
Compiled Mon 17-Jul-00 18:29 by ayounes
Image text-base: 0x00003000, data-base: 0x00301F3C

ROM: Bootstrap program is C3500XL boot loader

CISCO-SW24-L6-SYD-NOC-01 uptime is 6 hours, 50 minutes
System returned to ROM by reload
System image file is "flash:c3500XL-c3h2s-mz-120.5.2-XU.bin"


cisco WS-C3524-XL (PowerPC403) processor (revision 0x01) with 8192K/1024K
bytes
of memory.
Processor board ID FAA0452W0BT, with hardware revision 0x00
Last reset from warm-reset

Processor is running Enterprise Edition Software
Cluster command switch capable
Cluster member switch capable
24 FastEthernet/IEEE 802.3 interface(s)
2 Gigabit Ethernet/IEEE 802.3 interface(s)

32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: 00:04:9A:FC:41:40
Motherboard assembly number: 73-3904-11
Power supply part number: 34-0851-02
Motherboard serial number: FAB0451A0RI
Power supply serial number: NONE
Model revision number: A0
Model number: WS-C3524-XL-EN
System serial number: FAA0452W0BT
Configuration register is 0xF


 
Reply With Quote
 
 
 
 
Dalgaard
Guest
Posts: n/a
 
      10-26-2003

"Matthew" <(E-Mail Removed)> wrote in message
news:vPtmb.164847$(E-Mail Removed)...
> Hi,
>
> I am trying to configure radius authentication on some Cisco devices.
>
> Following the instructions, i am able to configure the AAA command
> components, but when try and configure the "radius-server" components the
> command is not recognised.
>
> Is authentication via a radius server supported on the following platform:
>
> Thanks for your help
> Matthew ((E-Mail Removed))
>
>
> Cisco Internetwork Operating System Software
> IOS (tm) C3500XL Software (C3500XL-C3H2S-M), Version 12.0(5.2)XU,
> MAINTENANCE IN
> TERIM SOFTWARE
> Copyright (c) 1986-2000 by cisco Systems, Inc.
> Compiled Mon 17-Jul-00 18:29 by ayounes
> Image text-base: 0x00003000, data-base: 0x00301F3C
>
> ROM: Bootstrap program is C3500XL boot loader
>
> CISCO-SW24-L6-SYD-NOC-01 uptime is 6 hours, 50 minutes
> System returned to ROM by reload
> System image file is "flash:c3500XL-c3h2s-mz-120.5.2-XU.bin"
>
>
> cisco WS-C3524-XL (PowerPC403) processor (revision 0x01) with 8192K/1024K
> bytes
> of memory.
> Processor board ID FAA0452W0BT, with hardware revision 0x00
> Last reset from warm-reset
>
> Processor is running Enterprise Edition Software
> Cluster command switch capable
> Cluster member switch capable
> 24 FastEthernet/IEEE 802.3 interface(s)
> 2 Gigabit Ethernet/IEEE 802.3 interface(s)
>
> 32K bytes of flash-simulated non-volatile configuration memory.
> Base ethernet MAC Address: 00:04:9A:FC:41:40
> Motherboard assembly number: 73-3904-11
> Power supply part number: 34-0851-02
> Motherboard serial number: FAB0451A0RI
> Power supply serial number: NONE
> Model revision number: A0
> Model number: WS-C3524-XL-EN
> System serial number: FAA0452W0BT
> Configuration register is 0xF
>
>

I have a ws-c3548-xl, where it is not supportet, so the same must be for
your switch. But it supports tacacs.
I'm not aware if an upgrade should help ?

the cisco ws-c2950-24 and 48 have support for radius.


 
Reply With Quote
 
 
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Re: Where to get stand alone Dot Net Framework version 1.1, version2.0, version 3.0, version 3.5, version 2.0 SP1, version 3.0 SP1 ? MowGreen [MVP] ASP .Net 5 02-09-2008 01:55 AM
Re: Where to get stand alone Dot Net Framework version 1.1, version 2.0, version 3.0, version 3.5, version 2.0 SP1, version 3.0 SP1 ? PA Bear [MS MVP] ASP .Net 0 02-05-2008 03:28 AM
Re: Where to get stand alone Dot Net Framework version 1.1, version 2.0, version 3.0, version 3.5, version 2.0 SP1, version 3.0 SP1 ? V Green ASP .Net 0 02-05-2008 02:45 AM
Login authentication to Nortel switch using Cisco ACS v3.3 Radius Orion Cisco 0 04-03-2006 10:29 AM
Cisco radius attributes with Funk Steel-Belted Radius Server David Cisco 0 11-06-2003 09:54 PM



Advertisments