Velocity Reviews - Computer Hardware Reviews

Velocity Reviews > Newsgroups > Computing > Cisco > Newbie help with port forward

Thread Tools

Newbie help with port forward

Matthew Kerner
Posts: n/a
I was handed a new client and they recently purchaed a Pix 501 (totally
overkill for them). All I really need to do is have a port forward command
to let us administrator the server with vnc (5900).
I tried to add the line:
static (inside, outside) tcp 5900 5900 netmask 0 0
but it didn't work. It was in the config and I wrote it to mem but I still
couldn't get in.
Also, I didn't write any of this config. I am familiar with the 2600's or
67x's etc but don't know the Pix.
could someone look over this config and tell me what's up?
What are the lines I marked with the * doing?

PIX Version 6.1(4)
nameif ethernet0 outside security0
nameif ethernet1 inside security100
enable password F2izeCCM7gqR/Ut7 encrypted
passwd 7qFKWNrYgAU4ASQj encrypted
hostname pixfirewall
fixup protocol ftp 21
fixup protocol http 80
fixup protocol h323 1720
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol smtp 25
fixup protocol sqlnet 1521
fixup protocol sip 5060
fixup protocol skinny 2000
name Chris
name Tracking
access-list ipsec permit ip
access-list nonat permit ip
*access-list outside_access_in permit udp any eq 22335 any
*access-list outside_access_in permit udp any eq 17335 any
pager lines 24
logging on
interface ethernet0 10baset
interface ethernet1 10full
mtu outside 1500
mtu inside 1500
ip address outside
ip address inside
ip audit info action alarm
ip audit attack action alarm
pdm location outside
pdm location inside
pdm location Chris inside
pdm location Tracking outside
pdm location inside
pdm location outside
pdm logging informational 100
pdm history enable
arp timeout 14400
global (outside) 1 interface
nat (inside) 0 access-list nonat
nat (inside) 1 0 0
nat (inside) 1 0 0
*static (inside,outside) Tracking Chris netmask 0 0
access-group outside_access_in in interface outside
route outside 1
timeout xlate 0:05:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h323
0:05:00 si
p 0:30:00 sip_media 0:02:00
timeout uauth 0:05:00 absolute
aaa-server TACACS+ protocol tacacs+
aaa-server RADIUS protocol radius
http server enable
http inside
no snmp-server location
no snmp-server contact
snmp-server community public
no snmp-server enable traps
floodguard enable
sysopt connection permit-ipsec
no sysopt route dnat
crypto ipsec transform-set avalanche esp-des esp-md5-hmac
crypto ipsec security-association lifetime seconds 3600
crypto map forsberg 21 ipsec-isakmp
crypto map forsberg 21 match address ipsec
crypto map forsberg 21 set peer
crypto map forsberg 21 set transform-set avalanche
crypto map forsberg interface outside
isakmp enable outside
isakmp key ******** address netmask
isakmp identity address
isakmp policy 21 authentication pre-share
isakmp policy 21 encryption des
isakmp policy 21 hash md5
isakmp policy 21 group 1
isakmp policy 21 lifetime 86400
telnet inside
telnet timeout 5
ssh outside
ssh timeout 5
dhcpd address inside
dhcpd dns
dhcpd lease 3600
dhcpd ping_timeout 750
dhcpd auto_config outside
dhcpd enable inside
terminal width 80
pixfirewall# sh ont
Type help or '?' for a list of available commands.


Reply With Quote

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
Cisco port 8080 port forward to public interface rickbath Cisco 0 05-30-2012 06:27 AM
Need help on port forward on 501 PIX Cisco 2 09-20-2005 01:45 PM
port forward / port changing Michael Cisco 1 07-17-2005 12:50 PM
BELKIN ROUTER PORT FORWARD HELP MICHAEL Computer Support 11 04-16-2005 07:07 AM
Re-forward declaration of types which were already forward declared qazmlp C++ 1 02-15-2004 07:00 PM