Velocity Reviews - Computer Hardware Reviews

Velocity Reviews > Newsgroups > Computing > Cisco > PIX 501 Routing ?

Reply
Thread Tools

PIX 501 Routing ?

 
 
Jogel
Guest
Posts: n/a
 
      05-17-2006
Hello,
I have 2 routers in my network .
i'm trying to add route lines to my main router (PX510) network address
10.10.10.100/
my netowkr computers are on 10.10.10.0
my other networks are on 10.10.60.0 and 10.10.50.0.
router to these ends is on 10.10.10.90
when i tried to ping from the router to these addresses i got no
response so i added static route on the routeing tab under the PX
device manager to the 10.10.60.0 gateway 10.10.10.90 i used the tools
--> ping and tried pinging a computer on the other network with the
ping tool again. i got a response.
when I try to ping from the a computer on the 10.10.10.0 network i get
no response unless i add a route line directly to 10.10.10.90 and then
ping works
as for the computer on the 10.10.10.0 defualt gateway is 10.10.10.100


Thnks in advance for any help

 
Reply With Quote
 
 
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
pix 501 - routing from pix subnet to another (dir-655) question ra170 Cisco 1 11-22-2010 04:46 AM
Cisco pix 501 vs 501-50 cdoc Cisco 6 05-20-2006 03:53 AM
PIX 501 <-> PIX 501 - Problem contating private networks on the inside Andre Cisco 7 02-20-2005 07:02 PM
PIX 501 not routing all IPs in a range? vze78se7@verizon.net Cisco 6 11-03-2004 02:17 PM
PIX 501 and Routing Robert McIntosh Cisco 2 09-02-2004 09:06 PM



Advertisments