Velocity Reviews - Computer Hardware Reviews

Velocity Reviews > Newsgroups > Computing > Cisco > VPN Concentrator 3005 - Cannot connect via Window XP built in VPN

Reply
Thread Tools

VPN Concentrator 3005 - Cannot connect via Window XP built in VPN

 
 
Scott
Guest
Posts: n/a
 
      05-15-2006
I just installed the VPN Concentrator 3005 and I am trying to run some
tests. I can install the Cisco client and have it authenticate fine.
I am unable to use the built-in Windows VPN connector.

I keep getting the following error:
691
Either your user account is not registered with the domain listed, your
password is expired, or you mistyped the information. If you do not
specify a domain, the remote access server attempts to verify your user
name and password on the domain of which it is a member.
Carefully retype your user name, password, and domain. If you are
unsure of this information, contact your system administrator.

In the Windows connection I use all of the defaults and enter the
following data:

Username: scott
Password: password
Domain: mydomain

On the concentrator I use the NT domain server type, authentication
server address, and domain controller name capitalized. I can go to
test on this screen and use the SAME credentials and get the
Authentication Successful message.

Here are the internal Concentrator's logs:

402 05/15/2006 15:02:36.190 SEV=4 PPTP/34 RPT=27 x.x.x.234
Tunnel to peer x.x.x.234 closed, reason: None (No additional info)

400 05/15/2006 15:02:36.060 SEV=4 PPTP/35 RPT=27 x.x.x.234
Session closed on tunnel x.x.x.234 (peer 32768, local 23041, serial
30810), r
eason: User request (No additional info)

399 05/15/2006 15:02:35.880 SEV=5 PPP/8 RPT=15 x.x.x.234
User [MYDOMAIN\scott]
Authenticated successfully with MSCHAP-V1

398 05/15/2006 15:02:32.600 SEV=4 PPTP/42 RPT=27 x.x.x.234
Session started on tunnel x.x.x.234

397 05/15/2006 15:02:32.570 SEV=4 PPTP/47 RPT=27 x.x.x.234
Tunnel to peer x.x.x.234 established

 
Reply With Quote
 
 
 
 
jbrunner007@hotmail.com
Guest
Posts: n/a
 
      05-16-2006
for built-in vpn access you will need to use L2TP or PPTP from windows
xp... configure the vpn 3005 group for this, and make sure those
protocols are active and permitted in vpn 3005 interface filters...

If you want to try to get native ipsec from windows built-in to vpn
3005 working, make sure ipsec service is started on the windows box
(install of the cisco vpn client stops it)
then figure out what transform set, etc. the windows box and the vpn
3005 can share...

have fun

Scott wrote:
> I just installed the VPN Concentrator 3005 and I am trying to run some
> tests. I can install the Cisco client and have it authenticate fine.
> I am unable to use the built-in Windows VPN connector.
>
> I keep getting the following error:
> 691
> Either your user account is not registered with the domain listed, your
> password is expired, or you mistyped the information. If you do not
> specify a domain, the remote access server attempts to verify your user
> name and password on the domain of which it is a member.
> Carefully retype your user name, password, and domain. If you are
> unsure of this information, contact your system administrator.
>
> In the Windows connection I use all of the defaults and enter the
> following data:
>
> Username: scott
> Password: password
> Domain: mydomain
>
> On the concentrator I use the NT domain server type, authentication
> server address, and domain controller name capitalized. I can go to
> test on this screen and use the SAME credentials and get the
> Authentication Successful message.
>
> Here are the internal Concentrator's logs:
>
> 402 05/15/2006 15:02:36.190 SEV=4 PPTP/34 RPT=27 x.x.x.234
> Tunnel to peer x.x.x.234 closed, reason: None (No additional info)
>
> 400 05/15/2006 15:02:36.060 SEV=4 PPTP/35 RPT=27 x.x.x.234
> Session closed on tunnel x.x.x.234 (peer 32768, local 23041, serial
> 30810), r
> eason: User request (No additional info)
>
> 399 05/15/2006 15:02:35.880 SEV=5 PPP/8 RPT=15 x.x.x.234
> User [MYDOMAIN\scott]
> Authenticated successfully with MSCHAP-V1
>
> 398 05/15/2006 15:02:32.600 SEV=4 PPTP/42 RPT=27 x.x.x.234
> Session started on tunnel x.x.x.234
>
> 397 05/15/2006 15:02:32.570 SEV=4 PPTP/47 RPT=27 x.x.x.234
> Tunnel to peer x.x.x.234 established


 
Reply With Quote
 
 
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Citrix access via VPN 3005 concentrator w/WebVPN slim Cisco 1 01-31-2006 02:00 AM
W2K vpn client to Cisco 3005 VPN concentrator srp336@getcoactive.com Cisco 4 06-26-2005 09:29 PM
VPN Connection Problems between Cisco PIX 506E and Cisco VPN Concentrator 3005 Kai Cisco 0 02-15-2005 02:03 PM
Cisco PIX 501 using pptp to connect to cisco vpn 3005 concentrator Kai Cisco 1 05-14-2004 02:44 PM
Cisco 3002 VPN client vs 3005 concentrator Rob Cisco 0 02-18-2004 02:20 PM



Advertisments