Velocity Reviews - Computer Hardware Reviews

Velocity Reviews > Newsgroups > Computing > Cisco > Re: Cisco 2500 upgrade ROM

Reply
Thread Tools

Re: Cisco 2500 upgrade ROM

 
 
Michael T. Hall
Guest
Posts: n/a
 
      07-21-2003
As the name "ROM" (Read-Only Memory) implies, there is no software mechanism
capable of the upgrade. You'll need to call Cisco TAC to order part number
2500-BOOT=.

Here's a complete set of replacement instructions:
http://www.cisco.com/en/US/products/...0800eab17.html

-Michael


"Sergejs" <(E-Mail Removed)> wrote in message
news:(E-Mail Removed) om...
> Hi all !
>
> I have a Cisco 2500 router with ROM version 5.2(8a). This ROM doesn't
> support "ip nat pools" and I want to upgrade ROM to version 11.0. Can
> I download new ROM from Cisco site and install them via tftp? Or I
> must bought new ROM chips from Cisco?
>
> Thanks,
> Sergejs



 
Reply With Quote
 
 
 
 
Sergejs
Guest
Posts: n/a
 
      07-21-2003
Thanks, Michael
 
Reply With Quote
 
 
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Cisco 2500/Cisco 1900 Switch/Cable Modem asmohamed12 Cisco 0 08-22-2007 12:35 AM
Boot ROM chip required to upgrade both a Cisco 2610 and a Cisco 2620 router to support 32 megs+ flash and more than 64 megs RAM Mike Rahl Cisco 1 06-14-2007 05:33 PM
IOS Upgrade through console in cisco 2500 bond007 Cisco 8 11-01-2006 06:41 AM
2500 boot ROM on 4000 router? Nick Cisco 2 06-14-2004 04:33 AM
Cisco 2500 Upgrade to 16 MB Lowell Cisco 2 11-05-2003 07:12 PM



Advertisments